The following table lists the keystrokes that you can use with the T27 keyboard map (T27.EKM).
When you see two keys connected by a plus sign (+), press and hold down the first key, then press the second key. For all keystrokes that involve the numeric keypad, Num Lock must be off.
Table 44
Keystroke Name |
Description |
T27.EKM Keystroke |
---|---|---|
BackSpace |
Moves the cursor left (no characters are erased). |
BACKSPACE |
Bound |
Marks the end of text to be copied into the data-sharing buffer. |
CTRL+B |
CarriageReturn |
Moves the cursor to the first column of the next line or the first column of the current line, depending on the session configuration. |
ENTER |
ClearPageCursorHome |
Deletes all text on the page and moves the cursor home. In forms mode, this keystroke deletes either text in unprotected fields or all text, depending on the session configuration. Subsequently, the cursor moves to the first unprotected field. |
SHIFT+HOME |
ClearToEndOfLine |
Deletes all text from the cursor to the end of the line. In forms mode, this keystroke deletes all text from the cursor to the end of the field. |
CTRL+DELETE |
ClearToEndOfPage |
Deletes all text from the cursor to the end of the page. |
CTRL+SHIFT+DELETE |
Ctrl |
Puts the session in control mode. |
CTRL |
CursorToEndOfLine |
Moves the cursor to the last position on the line |
CTRL+END |
CursorToEndOfPage |
Moves the cursor to the last position on the page. |
END |
CursorWordLeft |
Moves the cursor to the first character of the previous word. |
CTRL+LEFT ARROW |
CursorWordRight |
Moves the cursor to the first character of the next word. |
CTRL+RIGHT ARROW |
DeleteFromLine |
Deletes the character at the cursor location and shifts the remaining characters on the line to the left. |
DELETE |
DeleteLine |
Deletes the line where the cursor is located. |
CTRL+D |
Down |
Moves the cursor down. |
DOWN ARROW |
F1 ... F10 |
Perform host-defined function. |
CTRL+1...CTRL+0 |
Home |
Moves the cursor home. |
HOME |
Ins |
Toggles between overwrite mode and insert-in-line mode. This keystroke might also insert a space at the cursor location, depending on the session configuration. |
INSERT |
InsertLine |
Inserts a line at the cursor location, moving all subsequent lines down and moving the cursor to the first column of the new line. Any data that was on the last line of the page is lost. |
CTRL+I |
Left |
Moves the cursor left. |
LEFT ARROW |
Local |
Puts the session in local mode. |
F4/ (Numeric Keypad) |
Mark |
Marks the beginning of text to be copied into the data-sharing buffer. |
CTRL+M |
PageDown |
Displays the next page. If the last page already is displayed, this keystroke displays the first page. |
PAGE DOWN |
PageUp |
Displays the previous page. If the first page already is displayed, this keystroke displays the last page. |
PAGE UP |
PutETX |
Inserts an end-of-text character at the cursor location and moves the cursor home.In insert-in-line or insert-in-page mode, characters after the character shift to the right. In overwrite mode, the character replaces any character at the cursor location. |
CTRL+E |
Recall |
Pastes text copied using Mark and Bound at the cursor location. |
CTRL+R |
Receive |
Puts the session in receive mode. |
F3* (Numeric Keypad) |
Right |
Moves the cursor right. |
RIGHT ARROW |
ShiftF1 ... ShiftF10 |
Perform a host-defined function. |
CTRL+SHIFT+1...CTRL+SHIFT+0 |
Specify |
Transmits the cursor location to the host. This keystroke might also send the page number, depending on the session configuration. The session configuration also determines whether the data is sent in hexadecimal or ASCII format. |
F5 |
Start/Stop Blind Key Programming |
Starts or stops blind key programming. If blind key programming is not in progress, this keystroke initiates it. If blind key programming is in progress, this keystroke ends it. |
CTRL+F12 |
Store |
Copies text selected using Mark and Bound to the data-sharing buffer. |
CTRL+S |
Tab |
Moves the cursor to the next tab stop or unprotected field. |
TAB |
TabBack |
Moves the cursor to previous tab stop or unprotected field. |
SHIFT+TAB |
ToggleTtyMode |
Toggles between teletype mode and normal terminal emulation. |
PRINT SCREENCTRL+T |
Transmit |
Transmits data to the host. Depending on the session configuration, this keystroke sends the data from home to the cursor position or from home to the end of the page. |
F2+ (Numeric Keypad) |
TransmitLine |
Transmits the data from the beginning of the line to the cursor location. |
CTRL+F2- (Numeric Keypad) |
Up |
Moves the cursor up. |
UP ARROW |