|
Server Properties
|
Network Name
|
The SNA network name (NETID) for VTAM.1 Nick Name: NETID
Source: SYS1.VTAMLST (ACSTRxx)
|
|
|
D1 |
|
|
Control Point
|
The control point name (CPNAME) for this server as specified in the PU definition of VTAM or NCP. Nick Name: CPNAME
Source: VTAM PU definition
|
|
|
D2 |
|
Connection Properties
|
Connection Name
|
A name for the connection between this server and the remote system. This value is used internally by the SNA Server. |
|
|
D3 |
|
|
Link Service
|
The DLC type used to reach the host.(802.2 for either Ethernet or Token Ring.) Note:
Verify that the selected protocol has been installed on the SNA Server machine.
|
SnaDlc1 |
|
D4 |
|
|
Remote End
|
One of the following system types
- Host System
- Peer System
- Down Stream
For DB2 FOR OS/390, use Host System
|
|
|
D5 |
|
|
Activation
|
One of the following activation events that SNA Server will use to start this connection.
- Startup
- On Demand
- Manually (by Admin)
|
Startup |
|
D6 |
|
Connection Properties
|
Allowed Directions
|
Outgoing. Incoming optional. |
Outgoing and Incoming |
|
D7 |
|
SETUP
|
Remote Network Address
|
The 12-digit hexadecimal network address (MAC address) for this server. This address starts with 4000...for Token Ring, and with 02...for Ethernet. Nick Name: Target Mac Address
Source: VTAM controller definition
|
|
|
D8 |
|
Local Node Name
|
Local Node ID
|
The 8-digit hexadecimal local ID number for this server. The first three digits must match the IDNUM parameter in VTAM, and the last five digits must match IDBLK. Nick Name: IDNUM & IDBLK
Source: VTAM PU definition
|
|
|
D9 |
|
Remote Node Name
|
Network Name
|
The SNA network name (NETID) for VTAM. Can be blank for APPN Peer-to-Peer.1 Nick Name: NETID
Source: SYS1.VTAMLST (ATCSTRxx)
|
|
|
D10 |
|
|
Control Point
|
The system services control point name (SSCPNAME) of the host node as specified in the PU definition of VTAM or NCP. Can be blank for APPN Peer-to-Peer. Nick Name: SSCPNAME
Source: SYS1.VTAMLST (ATCSTRxx)
|
|
|
D11 |
|
|
XID Format
|
Format 3 |
Format 3 |
Format 3 |
D12 |
|
|
Remote Node ID
|
IDNUM and IDBLK parameter in VTAM Nick Name: Remote target NODE ID
|
blank |
|
D13 |
|
APPC LU Properties
|
LU6.2 Type
|
Independent Nick Name: LOCADDR = 0
Source: VTAM LU definition
|
Independent |
Independent |
D14 |
|
APPC LU Properties
|
LU Alias
|
A name that represents this machine in its local SNA communications configuration. We recommend that you use the XDB Server name as the alias. |
XDBSERVE |
|
D15 |
|
|
Network Name
|
The SNA network name (NETID) for VTAM.1 Nick Name: NETID
Source: SYS1.VTAMLST (ATCSTRxx)
|
|
|
D16 |
|
|
LU Name
|
The LU name for this APPC LU. Must match the independent LU name specified in VTAM. Nick Name: Independent LU Name
Source: VTAM LU Definition
|
|
|
D17 |
|
|
Enable Automatic Partnering
|
Enabled |
Enabled |
Enabled |
D18 |
|
|
Implicit Incoming
|
(None) |
(None) |
(None) |
D19 |
|
APPC Remote LU Properties
|
LU Alias
|
A name that will represent the remote APPC LU in this server's SNA communication configuration. |
|
|
D20 |
|
|
Network Name
|
The SNA network name (NETID) for VTAM.1 Nick Name: NETID
Source: SYS1.VTAMLST (ATCSTRxx)
|
|
|
D21 |
|
|
LU Name
|
VTAM APPLID for DB2 subsystem. Nick Name: DB2 APPLID
Source: VTAM APPL definition
|
|
|
D22 |
|
|
Uninterpreted LU Name
|
VTAM APPLID for DB2 subsystem. Nick Name: DB2 APPLID
Source: VTAM APPLS
|
|
|
D23 |
|
Mode
|
Mode Name
|
IBMRDB or the mode name (DLOGMODE) defined for LU definition in VTAM. Note:
MODETAB Name = VTAM mode table
DLOGMODE name = mode name for LU.
Nick Name: DLOGMODE
Source: ISTINCLM (or other specified name for the LOGMODE table)
|
|
|
D24 |
