Micro Focus Enterprise Developer 3.0 for Eclipse > Programming > Mainframe Programming > AppMaster Builder > Reference > Error Messages > IMS- IMS messages

IMS- IMS messages

Restriction: This topic applies only when the AppMaster Builder AddPack has been installed, and applies only to Windows platforms.

Select the number of the message you require details about:

IMS-1020-00-E (TP) Subscript missing for SCR FLD
An attributed field within a repeated block is missing the subscript for that field.
IMS-1030-00-E (TP) SCR FLD is not a repeated field
You coded a subscript with an attributed field that is not part of a repeated block. Remove the subscript.
IMS-1040-00-E (TP) FLD is not a valid field for SCR
The coded field name is invalid for the named screen.
IMS-1050-00-E (TP) Required screen name not supplied
You did not supply the screen name when:
IMS-1060-00-E (TP) Required attribute not supplied
When setting attributes (ATTR), you did not supply the attribute.
IMS-1070-00-E (TP) Required field name not supplied
When setting attributes (ATTR), you did not supply any field name(s).
IMS-2010-00-E (TP) Combination of attributes not recognized in attribute table
The attribute table in APIMSTP does not contain the combination of the values given.
IMS-2011-00-E PREV invalid for IMS
The keyword PREV or PREVIOUS is invalid when accessing an IMS database.
IMS-2030-00-W (TP) Attributes not valid
IMS-2031-00-E Invalid command for GSAM
AMB does not allow this call for GSAM records.
IMS-2040-00-E Multi level call invalid for GSAM
You can specify a single record only when accessing a GSAM database.
IMS-2041-00-W Extended attribute has no effect on screen in PCIMS
The extend attribute xxxxxxxx is color, blink, reverse video, or underscore, depending on what you coded in the ATTR call.
IMS-2043-00-W Fields defined
More than 400 fields in one screen not supported in PCIMS. You coded more than 400 fields for one screen, exceeding the limit for PCIMS.
IMS-2050-00-E GSAM record can be qualified only on one field
You can qualify the record on one key only when accessing a GSAM database.
IMS-2060-00-E GSAM record must be qualified on GSAM-KEY
You must use the field GSAM-KEY when qualifying on a GSAM record .
IMS-2070-00-E For record no PCB with procopt G or I
To retrieve a GSAM record, the PCB needs a procopt of G; to insert a GSAM record, the PCB needs a procopt of I.
IMS-2080-00-I View has defaulted to
You did not specify a view name in the call, so the View has defaulted.
IMS-2090-00-E Procopt violation get required for record
You coded a DB-OBTAIN for a record and the PCB does not allow retrievals.
IMS-2100-00-E Procopt violation insert required for record
You coded a DB-STORE for a record and the PCB does not allow inserts.
IMS-2110-00-E Procopt violation replace required for record
You coded a DB-MODIFY for a record and the PCB does not allow updates.
IMS-2120-00-E Procopt violation delete required for record
You coded a DB-ERASE for a record and the PCB does not allow deletes.
IMS-2130-00-E Procopt violation path required for record
You requested a record in a path call, and the procopt does not allow path calls.
IMS-2140-00-W For record record is key sensitive no data retrieved
For a DB-OBTAIN, AMB referenced the lowest level record; data was not retrieved.
IMS-2150-00-E For record lowest level record may not be referenced unless key sensitive
For a DB-OBTAIN, AMB may not reference the lowest level record unless it is key sensitive.
IMS-2160-00-W For key qualifications specified do not match actual number of parts comprising key
The key contains more than one field, but the number of qualifications specified in the call for this key is less than the actual number of parts.
IMS-2170-00-E For key too many qualifications specified for key
The key contains more than one field, and the number of qualifications specified in the call for this key exceeds the actual number of parts.
IMS-2180-00-E For record more than five command codes generated
The number of call codes generated exceeds the limit of five.
IMS-2190-00-E Assembler blocking routine must be used when not using default IO area
You must use the assembler blocking and unblocking routine when acting on more than one record in a call and specifying an IO area different from the default.
IMS-2200-00-E For record logical concatenated record invalid in path call when logical child is variable length
You cannot specify the record in a path call because the logical child portion is a variable length.
IMS-2210-00-W Data base call not generated Flag set to suppress data base call
The FMP flag, &IM-SUPPRESS-DB-CALL, is set to suppress the database call. No response is necessary.
IMS-3010-00-E For record for key key invalid for record
The key specified in the call is invalid for the record.
IMS-3020-00-E For record invalid record name
AMB does not recognize the specified record name as a valid COBOL record name.
IMS-3030-00-E For record PCB not found Invalid record name use COBOL record name
You did not give a PCB name the call, and AMB cannot use the default because the record name is incorrect.
IMS-3040-00-E For view invalid view name
The PCB name specified in the call is incorrect. Check the spelling of the named View (PCB).
IMS-3050-00-E For view for record invalid record name
Use COBOL record name. The record name specified in the call is incorrect.
IMS-3060-00-E For record for parent parent invalid for this record
The records specified in the call are not in the proper hierarchical order.
IMS-4010-00-E Function not now supported by PCIMS
Do not code the system service calls IM-STAT, IM-ROLL, IM-ROLB, and IM-LOG, if the target is PCIMS.
IMS-4020-00-W GSAM call generated without RSA PCIMS does not support RSA
Do not code a record search argument on the GSAM calls IM-GU, IM-GN, or IM-ISRT, if the target is PCIMS.
IMS-5010-00-E (TP) Program argument required
AMB invoked the MSG-SW call and detected that the first parameter is missing or contains nulls.
IMS-5020-00-E (TP) No alt PCB for
AMB invoked $TP-CHNG-TO-DEST and found no alternate PCB was defined.
IMS-5030-00-E (TP) No appropriate IO-PCB
A SEND or MSG-SW call required an alternate IO PCB with specific characteristics and the present program PSB cannot provide the appropriate PCB.
IMS-5040-00-F (TP) SUBSCHEMA or PSB macro not invoked
You did not invoke IM-PSB or DB-SUBSCHEMA.
IMS-5800-00-F (TP) DB2 is not a valid DB target for Micro Focus IMSVS86
The Data Definition symbols contain DB2 references.
IMS-6020-00-W (TP) Use TP-SEND with ENDCONV
You invoked a $TP-SEND-LAST call. AMB replaced this call with SEND.
IMS-6030-00-W (TP) Use $TP-SEND
You invoked a $TP-SEND-LAST call. AMB replaced this call with SEND.
IMS-6040-00-E (TP) Unknown keyword
The named keyword is invalid.
IMS-7010-00-E (TP) Screen must have value not null or spaces
AMB invoked SEND and the first parameter is missing or contains nulls.
IMS-7020-00-W (TP) Use $TP-MSG-SW instead of $TP-XCTL
You invoked XCTL. AMB replaced this call with MSG-SW.
IMS-7030-00-E (TP) First parm to TP-SCRNLIST must name a screen
The SCRNLIST call found a keyword as the first parameter. Keyword parameters must follow one or more screen names.
IMS-7040-00-E (TP) Screen must be labeled
SCRNLIST supplied the name of a screen without the LABELED option, where the input message contains the screen name as the final 8 bytes. AMB requires this so that logic generated by SCRNLIST can determine which screen it received at run time.
IMS-7050-00-E (TP) RECORD keyword invalid when using TP-SCRNLIST
The SCRNLIST call detected the RECORD keyword. RECORD is not a valid parameter for SCRNLIST.
IMS-7060-00-E ALT LTERM required for destination-printer
When using SEND and you defined the output device in the Screen Painter to a printer, ensure that you include an alternate PCB TYPE=TP definition in the PSB source.
IMS-8010-00-F (TP) Include APMDCSC before APIMSTP
You included the call library member APIMSTP before the member APMDCSC.
IMS-8020-00-F APIMSTP included twice - remove extra INCLUDE
You included the call library member, APIMSTP, twice.
IMS-8030-00-E $TP-LINKAGE invoked twice - remove extra INCLUDE
AMB invoked the call TP-LINKAGE more than once.
IMS-8040-00-E (TP) $TP-LINKAGE must be invoked before $TP-ENTRY
AMB invoked the call TP-LINKAGE after $TP-ENTRY.
IMS-8050-00-F $TP-ENTRY must be invoked for IMS program
You compiled a program with the MDC set to IMS/DC but AMB did not encounter TP-ENTRY.
IMS-8060-00-F $TP-SCRNLIST must be invoked before TP-ENTRY
AMB encountered $TP-ENTRY, followed by SCRNLIST.
IMS-8070-00-F TP-SCRNLIST invoked more than once
Only one invocation of SCRNLIST is valid.
IMS-8080-00-E xmlNOSPA keyword used twice
Only one SPA keyword allowed per SCRNLIST call.
IMS-9010-00-F Missing include SCRSYMB for SCR
The screen symbols for the named screen are missing.
IMS-9020-01-F IMS-9020-02-F PROGRAM-INVOKED para for non-conversational IMS program
A nonconversational IMS/DC program contains the paragraph APS-PROGRAM-INV-PARA. In a program using design mode, AMB performs this paragraph when the program is TP-PROGRAM-INVOKED. Usually, you set TP-PROGRAM-INVOKED to TRUE for a conversational program only. The presence of APS-PROGRAM-INV-PARA in a nonconversational program is a conflict, and may not function as intended.

Parent topic: Error Messages