JCLPT Error Messages

Message	Description
`JCLPT0001E PRINT/PUNCH statement not first`	The first statement in the control data set must be either a PRINT or a PUNCH statement.
`JCLPT0002E MEMBER INVALID - TYPORG not PO`	A MEMBER statement is invalid as the specified TYPORG is not PO. The default value for TYPORG is PS.
`JCLPT0003E INVALID COMMAND - no MAXNAME parameter`	If a MEMBER statement is present in the control data set, MAXNAME must be specified either in the PRINT or in the PUNCH statement.
`JCLPT0004E INVALID COMMAND - RECORD command already found`	When the RECORD and MEMBER statements are used, at least one MEMBER statement must precede the first RECORD statement.
`JCLPT0005E MAXNAME parameter is too small`	The specified MAXNAME parameter is less than the total number of member names specified in subsequent MEMBER statements.
`JCLPT0006E INVALID COMMAND - NO NAME parameter`	A NAME parameter is missing from the MEMBER statement.
`JCLPT0007E MORE THAN TWO TITLE CARDS`	Only two TITLE statements might be included for each use of MFJPTPCH. The first TITLE statement defines the title and the second statements defines the subtitle.
`JCLPT0008E Unrecognised command - [command]`	A command statement syntax error.
`JCLPT0009E SYSIN IS EMPTY`	The specified SYSIN is empty.
`JCLPT0010E MISSING COMMAND PRECEDING COL 71`	There are no command statements in columns 1 - 71 of the control data set.
`JCLPT0011E TYPORG value not found`	No value is specified for the TYPORG parameter.
`JCLPT0012E TYPORG value is not PO or PS - [value]`	The value of TYPORG must be either PS or PO.
`JCLPT0013E TOTCONV value not found`	No value is specified for the TOTCONV parameter.
`JCLPT0014E TOTCONV value is not XE or PZ - [value]`	The value of TOTCONV must be either XE or PZ.
`JCLPT0015E Option only valid for PRINT - [command]`	The specified control statement can only be coded with the PRINT statement.
`JCLPT0016W Option is not supported (ignored) - parameter`	The specified parameter is not currently supported and is ignored.
`JCLPT0017E Unrecognised keyword - [parameter]`	The specified parameter for PRINT or PUNCH is not valid.
`JCLPT0018E parameter value not found`	No value is specified for this parameter.
`JCLPT0019E parameter value is not numeric`	The value of the specified parameter should be numeric.
`JCLPT0020E Allocation failure for [parameter]`	Memory allocation failed for the specified parameter.
`JCLPT0021E No RECORD command parameters found`	No parameters are specified for the RECORD statement.
`JCLPT0022E FIELD specification not found`	No parameter value is specified for the RECORD FIELD statement.
`JCLPT0023E MAXFLDS parameter is too small`	The specified MAXFLDS parameter is less than the total number of FIELD parameters specified in subsequent RECORD statements.
`JCLPT0024E FIELD length value not found`	No length is specified in the RECORD FIELD statement.
`JCLPT0025E FIELD length value is not numeric - [length]`	The value of the FIELD length must be numeric.
`JCLPT0026E FIELD input location is not numeric - [input location]`	The FIELD input location must be numeric.
`JCLPT0027E FIELD conversion option is invalid - [conversion]`	The specified FIELD conversion option is not valid.
`JCLPT0028E FIELD output location is not numeric - [output location]`	The FIELD output location must be numeric.
`JCLPT0029E MAXGPS parameter is too small`	The specified MAXGPS parameter is less than the total number of IDENT parameters specified in the subsequent RECORD statements.
`JCLPT0030E IDENT length value not found`	No length is specified in the RECORD IDENT statement.
`JCLPT0031E IDENT length value is not numeric - [length]`	The value of the IDENT length must be numeric.
`JCLPT0032E IDENT length value is greater than 8 - [length]`	The IDENT length must not exceed eight bytes.
`JCLPT0033E Closing quote for IDENT text was not found`	The literal that identifies the last record of a record group must be enclosed in apostrophes.
`JCLPT0034E IDENT text is shorter than the specified length - [length]`	The IDENT text is shorter than the length specified in the control statement.
`JCLPT0035E IDENT text is longer than the specified length - [length]`	The IDENT text is longer than the length specified in the control statement.
`JCLPT0036E IDENT location is not numeric - [location]`	The starting location of the field that contains the identifying name in the input records must be a numeric.
`JCLPT0037E No TITLE command parameters found`	The TITLE statement is specified without any parameters.
`JCLPT0038E ITEM location is not numeric - [location]`	The output location specified in the TITLE ITEM statement must be numeric.
`JCLPT0039E Closing quote for ITEM text was not found`	The title or the subtitle literal specified in the TITLE statement must be enclosed in apostrophes.
`JCLPT0040E Continuation not found`	No continuation character was found in column 72 in SYSIN.
`JCLPT0041E Continuation starts before Col 4`	Continuation must start in column 4.
`JCLPT0042I SYSUT1 is partitioned, but TYPORG is PS - directory assumed`	SYSUT1 is a partitioned dataset, but the specified TYPORG is PS. PO organization is assumed for SYSUT1.
`JCLPT0043E SYSUT1 is sequential, but TYPORG is PO`	SYSUT1 is a sequential dataset, but the specified TYPORG is PO.
`JCLPT0044E Invalid SYSUT1 record format - [recfm]`	SYSUT1 can have only fixed, variable and line sequential record formats.
`JCLPT0045E SYSUT2 record length exceeds maximum`	The maximum record length of SYSUT2 is 145.
`JCLPT0046E Invalid SYSUT2 record format - [recfm]`	The record format of SYSUT2 is always FBA.
`JCLPT0047W Incorrect RECORD statement - FIELD extends beyond sysut2 LRECL`	The FIELD must not exceed the SYSUT2 LRECL.
`JCLPT0048E Continuation not started in 4-16`	Continuation must be between columns 4 and 16.
`JCLPT0049E SYSPRINT record length must be 121`	The record length of SYSPRINT must be 121.
`JCLPT0050E I/O error on [filename]`	I/O error on `filename`.
`JCLPT0051E MEMBER not valid for the action [action] - TYPORG not PO`	No MEMBER statements were found but the specified TYPORG is not PO.
`JCLPT0052E SYSIN record length must be 80`	The record length of SYSIN must always be 80.
`JCLPT0053E SYSUT1 concatenation error - Concatenated libraries are not supported`	SYSUT1 concatenation is not currently supported.
`JCLPT0054E Invalid syntax - [command]`	A command statement syntax error.
`JCLPT0055W Command "command-name" is not currently supported`	The specified command is not currently supported.
`JCLPT0056E File status is [status code]`	Specifies the returned file status code.
`JCLPT0057E IDENT location is greater than SYSUT1 record length - [location]`	The specified IDENT input-location must not be greater than the SYSUT1 LRECL.
`JCLPT0058E FIELD output location is greater than SYSUT2 record length - [location]`	The specified FIELD output location must not be greater than the SYSUT2 record length.
`JCLPT0059E Fatal error returned by [utility]`	The `utility` returned an error.
`JCLPT0060E Error writing to SYSUT2 - File status is [status code]`	The SYSUT2 write failed with the specified file `status code`.
`JCLPT0061E Fatal error returned by CBL_DIR_SCAN_START - [status-code]`	CBL_DIR_SCAN_START has failed.
`JCLPT0062E Error returned by CBL_DIR_SCAN_READ - [status-code]`	CBL_DIR_SCAN_READ has failed.
`JCLPT0063E Error reading SYSUT1 - File status is [status-code]`	The SYSUT1 read failed with the specified file `status code`.
`JCLPT0064E IDENT location is not found`	The specified IDENT location is not found.
`JCLPT0065E ERROR READING SYSIN - File status is [status-code]`	The SYSIN read failed with the specified file `status code`.
`JCLPT0066E DDNAME SYSIN cannot be opened - File status is [status-code]`	OPEN failed for SYSIN.
`JCLPT0067W MEMBER [member name] cannot be found`	The specified SYSUT1 member cannot be found.
`JCLPT0068E DDNAME SYSUT1 cannot be opened - File status is [status-code]`	OPEN failed for SYSUT1.
`JCLPT0069E DDNAME SYSUT2 cannot be opened - File status is [status-code]`	OPEN failed for SYSUT2.