Micro Focus Enterprise Developer 2.3 for Visual Studio 2015 > General Reference > Configuring CCI > CCI Status Messages > CCI Message Table

CCI Message Table

The following is a list of status numbers returned which may be produced from CCI modules, along with a brief explanation of their meaning, and, if applicable, a suggestion as to how to resolve the issue being reported. Status numbers which are produced to aid coding of CCI applications have been included in this list.

Message Number	Severity	Reason	Suggestion
0000	Information	The last operation completed successfully	No action to take
0001	Information	The last operation Timed-out prior to completion.	Increase time-out periods if the application allows, or check the status of the remote application to ensure that its host system is still functioning.
0002	Information	A buffer given to a CCI receiving operation was too small to contain the incoming data stream.	This is a warning intended for applications designers. Contact us if you suspect that this is actually causing a problem.
0003	Error	A bad parameter was given to a CCI function.	This is a application coding problem. Contact our technical support department and report any of these errors that appear.
0004	Warning	This is only generated from a Service initiation. This status indicates that a Service with the same name was previously registered at the same network address.	No action required, the current Service is now registered with the network, connecting clients will connect to this Service.
0005	Error	This is only generated from a Service initiation. This status indicates that a Service with the same name was previously registered at the same network.	Two services cannot exist on some networks with the same Service name, choose another name to start this Service with.
0006	Error	A name parameter passed being used to start a client or a Service was invalid.	The range of valid names differs for underlying protocols, please see the sections for the relevant CCI module for the protocol in use for this information.
0007	Error	An attempt was made to use a connection which has already been terminated.	This is a application coding error, contact our technical support department and report any occurrence of this error.
0008	Error	A broken connection was detected on this link.	Check the status of the network supporting this link and determine whether the problem lies at the network or at the machine at the far end of the link.
0010	Warning	The CCI module in use was too busy to complete the request.	Allow some of the outstanding CCI actions to complete before trying again.
0011	Warning	The CCI module discovered that the system was too low on memory to complete an action.	Close any unwanted applications, and free up some memory to allow the application to continue.
0012	Error	No service was found, the client could not complete a connection request.	Check the address passed as a location to the client and try again.
0013	Error	The address specified in the direct addressing modes would not accept a client connection.	Check the address passed as a location to the client and try again. The service listening at the far end may not be compatible with a CCI client.
0014	Error	An error occurred when creating a network endpoint.	The local network service provider was incapable of creating a new connection point, this usually means that a resource limit has been reached, or that the network itself is disabled. Check the system status and raise network resources as appropriate.
0015	Error	A transport error has occurred	CCI full network transport failure has been reported to CCI from the transport provider. Check the network status, correct any problems that are found and try again.
0016	Error	A CCI support module was not found on the network.	Some CCI protocols and configurations require network support modules, such as CCITCP2, please check to ensure that you have configured your network correctly to use CCI, and that the required support modules are running before starting CCI, then try again.
0017	Error	A transport connection error has occurred	Where possible CCI will distinguish between this message and message 0016. This message indicates that an individual connection has failed, rather than a general network failure occurring. Check the application at the far end of the link to ensure that it is still functioning.
0018	Information	An asynchronous call has not completed yet.	This status is intended for application programmers to monitor the status of an ongoing operation, it may be ignored by end users.
0019	Information	An asynchronous call has completed correctly.	This status is intended for application programmers to monitor the status of an ongoing operation, it may be ignored by end users. It is functionally equivalent to status "0000".
0020	Information	An asynchronous call has completed part one of a two part operation..	This status is intended for application programmers to monitor the status of an ongoing operation, it may be ignored by end users.
0021	Error	An error occurred when closing a session.	This could be a network or operating system failure, however a failure at this time may not affect the overall running of an application. Contact our technical support department if you suspect that this is actually causing a problem.
0022	Error	This is only generated from a Service termination. Could not de-register a service	There was a problem when terminating a service that prevented it being de-registered from the CCI support modules such as CCITCP2, or from the network provider itself. Subsequent attempts to start a Service with the same name will generate messages 0004 or 0005 depending upon the network which is being used.
0023	Error	This is only generated from a Service application. A client connection could not be completed due to a network level error condition.	The network service provider reported a failure to allow a full connection of an incoming client. Check the connecting clients to determine which of them is failing to connect, then check the network provider on the client and server machines for version compatibility.
0024	Error	A call to HANGUP a server session could not complete as data was still queued.	This is an application coding error. Contact our technical support department.
0025	Error	Transport initialization failure, INITCLIENT could not find CCITCP2,	The UDP support in the TCP/IP service provider configuration may be switched off, or may have run out of available resources. Ensure that UDP is enabled and that sufficient sockets are available, then try again.
0026	Error	Transport initialization failure during INITCLIENT.	Check the version details of the network service provider to ensure that CCI is compatible with this level of network provider.
0027	Error	A call to CCI-Query was made with an invalid session handle.	This is an application coding error. Contact our technical support department.
0028	Error	A call to CCI-Wait was made with an invalid session handle.	This is an application coding error. Contact our technical support department.
0029	Error	Parameters were incorrectly passed to the call named in the text.	This is an application coding error. Contact our technical support department.
0030	Error	A listen call failed as the machine was too busy to receive any more incoming client connections.	The system configuration is too small to support the connection load being used, either increase the system capacity for the protocol in use, or reduce the load on this specific system by examining other possible alternative to using this system.
0031	Error	A CCI function detected a transport failure during an attempt to receive a data buffer.	The network, or the machine at the far end of the connection, experienced an error condition, correct the network error and try again.
0032	Error	CCI-Transact function detected a transport failure during an attempt to send a data buffer.	The network, or the machine at the far end of the connection, experienced an error condition, correct the network error and try again.
0033	Error	CCI-Transact function detected a transport failure during an attempt to receive a data buffer.	The network, or the machine at the far end of the connection, experienced an error condition, correct the network error and try again.
0034	Error	CCITCP could not find an entry for "mfcobol" in the "services" TCP/IP configuration file.	An entry such as : 'mfcobol <TAB> 86/udp' must be included in the file for CCI to establish a registration ,or make a registration enquiry with a CCITCP2 module.
0035	Error	The far end of a connection has been reset.	Check this status of the remote end of a connection as it appears to have dropped off the network.
0036	Information	CCITCP2 could not be found, a CCI Service could not de-register correctly from CCITCP2.	The Service registration module, CCITCP2, may have been closed or the network link to the machine hosting CCITCP2 may have died. If CCITCP2 is still running any requests for this Service will find a registration which is not responding to Client connection attempts. Any further requests to register the Service by the same name will get a status "0004" returned as it was already registered. See the CCITCP configuration guide for further details about using CCITCP2.
0037	Error	An invalid service handle was passed to the CCI function named in the text.	This is an application coding error. Contact our technical support department.
0038	Error	An invalid async' request handle was passed to CCI-Query or CCI-Wait.	This message has been superseded by "0027" and "0028" and should only be found on older CCI installations. See "0027" and "0028" for the correct action to take.
0039	Warning	A data buffer and length combination given to CCI crossed a segment boundary in memory. Data was truncated at this boundary.	This is an application coding error. Contact our technical support department.
0040	Error	A call to CCI-Suspend was made prior to a call to CCI-Resume.	This is an application coding error. Contact our technical support department.
0041	Error	A call to initialize a network service provider has failed	Check the network support for the system and correct any problems found, then try again.
0042	Error	Could not attach to a Network Server	This CCIIPX message indicates that no NetWare server has been found on your network. CCIIPX cannot operate with a NetWare server on its network and so cannot continue.
0043	Error	Cannot connect to an incompatible version of CCI	A connection has been requested between dissimilar CCI installations, this has been detected and to prevent possible data flow problems a connection cannot be completed. please check the revisions in use and update the CCI installations as required before trying again.
0044	Error	Could not register a service	This could be a configuration error, see CCITCP2, or the underlying network could have failed to allow the registration due to insufficient capacity of available resources, see message 0025.
0045	Error	A bad address was passed to a CCI initialization call.	Check that the addresses used in the configuration are of the correct style and content for the CCI module being used, then try again.
0046	Error	CCIAPPC failed to locate an APPC session	Ensure that the local LU is defined for this session.
0047	Error	A call to CCI failed as CCI has already been terminated.	This is an application coding error. Contact our technical support department.
0048	Error	A bad data buffer location was passed to CCI for use in sending or receiving data.	This is an application coding error. Contact our technical support department.
0049	Error	CCI-Trace was unable to create trace output files for the CCI module named in the text.	There may be insufficient space left on the fixed disk to hold the data trace file. Please clear some space and try again.
0050	Error	The requested CCI-TRACE output file could not be opened	Check that write permissions are available for the user of the application being traced, and that there is sufficient disk space remaining to store the trace file before trying again.
0051	Error	An unexpected CCI error has occurred.	This is an internal CCI error. Contact our technical support department.
0052	Information	This status is reserved for future use.
0053	Information	This status is reserved for future use.
0054	Information	This status is reserved for future use.
0055	Warning	Cannot send or receive data on a suspended session.	This is an application coding error. Contact our technical support department.