Additional Software Requirements on Windows

Application Server support for JVM COBOL

The following application servers are supported using the following JDKs:

Application Servers	JDK version	Containers support version
Tomcat 7.0.X	1.7	Servlets 2.5
JBoss EAP 6.4	1.7, 1.8	Servlets 2.5
WebLogic 12.1.1	1.7	Servlets 2.5
WebLogic 12.2.1	1.8	Servlets 2.5
WebSphere 8.5	1.7	Servlets 2.5
WebSphere 9.0	1.8	Servlets 2.5

Please consult your Application Server documentation to determine which JDK you should use. The JDK is used to:

Start the Application Server
Compile EJBs and Servlets generated by the Interface Mapping Toolkit or the imtkmake command

After installing the JDK, you need to set up your Java environment.

Support for the following Java application servers using the following JDKs is planned for future release:

Application Servers	JDK (vendor)	Java EE	COBOL RAs and ECI
JBoss EAP 7.0 (AS 7.5)	1.8 (Oracle)	7	X
IBM WebSphere 8.5.5 (UNIX: all platforms)	1.7, 1.8 (IBM)	6	X
Tomcat 8.5.x*	1.7, 1.8 (Oracle)
*Apache Tomcat is an HTTP server and servlet container supporting Java Servlet and JavaServer Pages (JSP). Micro Focus Tomcat non-transactional support includes servlet generation with J2SE Beans; no transactional support is provided. Tomcat does not support the use of Enterprise Java Beans (EJBs) or resource adapters (RAs).

Note: If you experience any incompatibility issues when using these third-party products with Visual COBOL, please report them to SupportLine. Until full support is available, a timely effort to resolve incompatibility issues will be made; however, Micro Focus does not guarantee full compatibility until we have fully tested our software updates against these products.

You need Oracle's JDK. The earliest supported release of Oracle's JDK 1.7 is 1.7.027. You can download Oracle's JDK from Oracle's Web site.

Application Server JCA support for Enterprise Server

Back to Top

Restriction: This feature applies only when the Enterprise Server feature is enabled.

Various Java EE versions are supported for the deployment of EJBs generated using the Interface Mapping Toolkit, as follows:

Java EE 5 includes support for EJB 3.0 and Java Connector Architecture 1.5
Java EE 6 includes support for EJB 3.1 and Java Connector Architecture 1.6
Java EE 7 includes support for EJB 3.2 and Java Connector Architecture 1.7

The following Java application servers are supported using the following JDKs:

Application Servers	JDK (vendor)	Java EE	COBOL RA
JBoss EAP 6.4 (AS 7.5)	1.6, 1.7, 1.8 (Oracle)	6	X
Oracle WebLogic 10.3.x	1.6, 1.7 (Oracle)	5	X
Oracle WebLogic 12.1.x	1.6, 1.7, 1.8 (Oracle)	6	X
Oracle WebLogic 12.2.1	1.8 (Oracle)	7	X
IBM WebSphere 8.5	1.6, 1.7 (IBM)	6	X
IBM WebSphere 9.0	1.8 (IBM)	7	X
Tomcat 7.0.x*	1.6, 1.7, 1.8 (Oracle)
*Apache Tomcat is an HTTP server and servlet container supporting Java Servlet and JavaServer Pages (JSP). Micro Focus Tomcat non-transactional support includes servlet generation with J2SE Beans; no transactional support is provided. Tomcat does not support the use of Enterprise Java Beans (EJBs) or resource adapters (RAs).

Please consult your Application Server documentation to determine which JDK you should use. The JDK is used to:

Start the Application Server
Compile EJBs and Servlets generated by the Interface Mapping Toolkit or the imtkmake command

After installing the JDK, you need to set up your Java environment.

Support for the following Java application servers using the following JDKs is planned for future release:

Application Servers	JDK (vendor)	Java EE	COBOL RAs and ECI
JBoss EAP 7.0 (AS 7.5)	1.8 (Oracle)	7	X
IBM WebSphere 8.5.5 (UNIX: all platforms)	1.7, 1.8 (IBM)	6	X
Tomcat 8.5.x*	1.7, 1.8 (Oracle)
*Apache Tomcat is an HTTP server and servlet container supporting Java Servlet and JavaServer Pages (JSP). Micro Focus Tomcat non-transactional support includes servlet generation with J2SE Beans; no transactional support is provided. Tomcat does not support the use of Enterprise Java Beans (EJBs) or resource adapters (RAs).

Note: If you experience any incompatibility issues when using these third-party products with Visual COBOL, please report them to SupportLine. Until full support is available, a timely effort to resolve incompatibility issues will be made; however, Micro Focus does not guarantee full compatibility until we have fully tested our software updates against these products.

Code Analysis

Back to Top

Apache Ant is required to perform code analysis from the Visual COBOL command line. You can download Apache Ant from Apache's Web site.

Consolidated Trace Facility

Back to Top

The Microsoft .NET Framework 2.0 or later is required for the CTF Viewer. It is available from the Microsoft .NET downloads area.

Note: The setup file installs .NET Framework v4.5.2.

Database Access - COBSQL (Pro*COBOL)

Back to Top

Before deploying a COBSQL application, be sure to install and configure all applicable third-party software.

Note: COBSQL (Pro*COBOL) is supported for native COBOL only.

Availability

Feature/Platform	32-bit	64-bit
x86-64 running Windows	X	X

XA Switch Module

When the Enterprise Server feature is enabled, the Oracle XA switch module is provided for COBSQL (Pro*COBOL), and is available on the same platforms as are indicated in the Availability section above.

Certification of RDBMS Precompilers for Native COBOL

Certification of RDBMS precompilers with Micro Focus products is the responsibility of the RDBMS vendor, rather than Micro Focus. Certification information can be found within the relevant Oracle documentation. If you have an Oracle MetaLink account, document # 43208.1 provides details of all language compilers certified by Oracle for use with their precompilers.

Preprocessors

COBSQL supports the following database preprocessors:

Sybase Open Client Embedded SQL/COBOL Version 11.1 or later
Oracle Pro*COBOL Version 11.2, 12.1, and 12.2
Informix Embedded SQL/COBOL Version 7.3 or later

Compiling

On x86 and x86-64 platforms, when compiling with COBSQL for use with Oracle, do not use the COBSQL directive option NOMAKESYN, since this directive results in COMP host variables, and on Intel platforms these are incompatible with the native byte order expected by Oracle.

Testing

For this version, COBSQL was tested with Oracle 11.2, 12.1, and 12.2.

Database Access - DB2 ECM

Back to Top

Before developing or deploying a DB2 ECM application, be sure to install and configure all applicable third-party software.

Note: DB2 ECM is supported for native COBOL only.

Availability

Feature/Platform	32-bit	64-bit
x86-64 running Windows	X	X

XA Switch Module

When the Enterprise Server feature is enabled, the DB2 XA switch module is provided and is available on the same platforms as are indicated in the Availability section above.

Certification of RDBMS Precompilers for Native COBOL

Certification of RDBMS precompilers with Micro Focus products is the responsibility of the RDBMS vendor, rather than Micro Focus. You can find IBM document certification information for DB2/COBOL applications within the IBM Information Center for DB2, in the topic Support for database application development in COBOL.

Preprocessor

DB2 ECM supports the following database preprocessors:

IBM DB2 LUW Version 9.7 or later
IBM DB2 Connect Version 9.7 or later

Testing

For this version, DB2 ECM was tested with DB2 LUW 9.7, 10.1, 10.5, and 11.1.

Database Access - OpenESQL

Back to Top

Before developing or deploying an OpenESQL application, be sure to install and configure all applicable third-party software.

Availability

Feature/Platform	Native and JVM COBOL 32-bit	Native and JVM COBOL 64-bit
x86-64 running Windows	X	X

XA Switch Module

When the Enterprise Server feature is enabled, the ODBC One-phase Commit, SQL Server, and PostgreSQL switch modules are provided and available on the same platforms as are indicated in the Availability section above.

Native COBOL

OpenESQL supports access to relational databases using ODBC 3.0-compliant drivers
Refer to your driver vendor's documentation to determine whether your driver is suitable for use with OpenESQL

JVM COBOL

OpenESQL supports access to relational databases using JDBC 4.0-compliant JDBC drivers. The following table shows the tested DBMSs and their corresponding JDBC driver filenames:

Tested DBMS Versions	JDBC 4.0 Compliant Drivers
DB2 LUW 9.7 DB2 LUW 10.1 DB2 LUW 10.5 DB2 LUW 11.1	db2jcc4.jar (and db2jcc_license_cu.jar)
Oracle 11.2 Oracle 12.1	ojdbc6.zip¹ ojdbc7.zip¹
Microsoft SQL Server 2008 R2 Microsoft SQL Server 2012 Microsoft SQL Server 2014 Microsoft SQL Server 2016	sqljdbc4.jar²
EDB PostgreSQL 9.6	postgresql-42.0.0.jre7.jar
¹Some Oracle JDBC drivers are distributed as .zip rather than .jar files. ² On Windows platforms, if you are not using Windows authentication, no additional resources are required. However, if you are using Kerberos authentication with a driver version of 4.0 or later, although integrated authentication is not required, you might need to follow additional configuration steps as described in the driver documentation. No additional resources are required for UNIX platforms.

To use JDBC DataSource Objects, you must also install and configure a JNDI server.

If you are using a Java application server, it includes a JNDI server you can use to configure DataSource objects. This process is described in the Java documentation for the application server.
If you are not using a Java application server, or if you require a standalone JNDI server to configure DataSource objects for initial evaluation and development, see the To install and configure Simple-JNDI topic in this documentation set for instructions on downloading, installing, and configuring the open source JNDI server Simple-JNDI for this purpose.

Testing

For this version, OpenESQL was tested with:

Oracle 11.2 and 12.1
DB2 LUW 9.7, 10.1, 10.5, and 11.1
SQL Server 2008 R2, 2012, 2014, 2016, and 2017
EDB PostgreSQL 9.6
MySQL 5.7 (5.3 ODBC drivers only)

Note: Micro Focus provides compatibility for PostgreSQL and MySQL but does not directly contribute to or support either open source project. Any issues relating to the functionality of either DBMS should be addressed through an open source support vendor.

Java Development Kit (JDK)

Back to Top

For COBOL JVM code and Java Interoperability, Oracle's Java Platform, Standard Edition (Java SE) 7, 8 (32 or 64-bit versions), and Java 9 (64-bit version only) are supported. Oracle's Java Platform (64-bit) version 1.8 or later is required to run the Eclipse IDE; however, the minimum recommended version is Java 1.8.162 (64-bit), which the Windows product installation will install if it detects an older version. You can download Oracle's Java SE from Oracle's Web site and install it anywhere on your machine.

XML Extensions

Back to Top

XML Extensions has the same requirements as Visual COBOL. Both 32-bit and 64-bit versions are available. See the XML Extensions for Visual COBOL, available from the Visual COBOL product documentation section of the Micro Focus SupportLine Web site for more details.