To optimize testing with
Silk4J, configure the following settings on the
Android device that you want to test:
- Enable USB-debugging on the
Android device. For additional information, see
Enabling USB-Debugging
- An
Android device must be connected as a media device to the machine on which the Open Agent is running. The USB mode of the
Android device must be set to
Media device (MTP).
- An
Android device or emulator must not be screen-locked during testing. To keep the device awake while it is connected to a machine,
open the settings and tap
Developer Options. Then check
Stay awake or
Stay awake while charging.
- Make sure to enable the
3-button navigation in the
Android settings.
2-button navigation and
gesture navigation are not supported.