Document\Connection
|
Item Name |
Sub-group |
UI Description |
|---|---|---|
|
AutoConnect |
|
Specify to establish a host connection as soon as the associated session document is opened. |
|
AutoReconnect |
|
Specify to attempt to reestablish the connection when the session is disconnected |
|
Baud |
|
The rate at which Reflection transmits and receives data through the selected serial port. |
|
BeforeConnectStartupMacro |
|
Run a macro before the initial connection. |
|
ConnectionMethod |
|
Determines how the session connects to the host (Network, Serial Port, Modem). This setting is used in conjunction with ConnectionType. |
|
ConnectionType |
|
Determines how the session connects to the host (Telnet, Secure Shell, Rlogin). This setting is used in conjunction with ConnectionMethod. |
|
ConnectMacro |
|
Run the connection action when the session initially connects to a host. |
|
ExitAllowed |
|
Specify to allow closing the workspace when a session is connected to a host. |
|
ExitOnDisconnect |
|
Specify to automatically close the session when a session is disconnected. |
|
Host |
|
The name of the host to which to connect. |
|
ModemAdvancedSettingsDialog |
|
The More Settings Modem dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a modem connection. |
|
ModemAreaCode |
|
The area code (or city code) of the number being dialed. |
|
ModemCountryName |
|
The country of the number being dialed. |
|
ModemDialingPropertiesDialog |
|
The Phone and Modem Options dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a modem connection. |
|
ModemLocation |
|
The current modem location. Modem locations are configured using the Control Panel tool. |
|
ModemName |
|
The type of modem being used. |
|
ModemPhoneNumber |
|
The phone number you want the modem to dial when connecting. The number must adhere to the rules of your modem. |
|
ModemUserDialingRules |
|
Set the TAPI modem dialer to add appropriate dialing prefixes to the number you are dialing, based on the current values of ModemAreaCode, ModemCountryName, and ModemLocation. When cleared, the modem dialer dials the phone number exactly as specified by ModemPhoneNumber. |
|
NetworkAdvancedSettingsDialog |
|
The More Settings - Network dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a network connection. |
|
NetworkSecurityDialog |
|
The Security Properties dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a network connection. |
|
Parity |
|
The parity for data transmission to and from the serial device on this port. To use the multinational character set or 8-bit controls, Parity must be set to one of the values that offers 8-bit controls. If your communications link generates parity, and you set Parity to 8/None, multinational characters appear on your screen. In this case, set Parity to either 8/Even or 8/Odd. |
|
Port |
|
The host port or socket number that the session should use. This item restricts access to the Port setting when a Telnet connection type is selected. To restrict access when the Rlogin connection type is selected, use the RloginPort item. |
|
PromptReconnect |
|
Prompt to confirm whether to disconnect a session when a session is disconnected manually or by closing the session or the workspace. |
|
RloginPort |
|
The host port or socket number that the session should use when using an Rlogin connection. This item restricts access to the Port setting when an Rlogin connection type is selected. |
|
RunMacroAtReconnect |
|
Run the macro when the session initially connects to a host, and every time it reconnects to the host. |
|
SerialAdvancedSettingsDialog |
|
The More Settings - Serial Port dialog box. Restricting access to this setting limits user access to this dialog box when a session is configured for a Serial Port connection. |
|
SerialPort |
|
The serial port to use when connecting to the host via a serial port connection. |
|
SSHConfigScheme |
|
The SSH configuration scheme settings to use to make a Secure Shell connection. |
|
SSHSingleSettings |
|
Does not apply to Reflection. |
|
SSHTermWindowAuth |
|
Set up Secure Shell connections to display user name and password prompts in the terminal window instead of in a dialog box. |
|
UserName |
|
A name that identifies you or your PC to the host. |