Logging Settings Dialog Box
Getting there
-
Open a VT terminal session.
-
From the ribbon, in the group, click the > launcher:
Use this dialog box to configure logging and to enable serial device-to-host communications.
The options are:
Log Output To
|
|
Select to print the output. The printer selected in is displayed. |
|
|
Click to control printer settings that apply only to InfoConnect, or to select a different Windows printer. |
|
|
Select to send output to a file. Type the path and filename for the output file. Create an ASCII text file, and translate line-drawing characters to their closest ANSI equivalent. |
|
|
Select to send output to the bidirectional serial device connected to the configured serial port. NOTE:The option is not used for typical printing, even if you have your Windows printer on the serial port. This option is only used for devices on serial ports, such as bar-code readers, which need to send information back and forth between the host and the device, through InfoConnect. |
|
|
Click to select and configure a serial port. The button from the dialog box is equivalent to the button from the dialog box. You can use the button from either dialog box to configure your serial device port. |