Open a printer emulation session.
From the Setup menu, choose View Settings.
This setting specifies the secondary paper source to be used by the host printer. Choose from the following options:
|
Option |
Description |
|---|---|
|
*A3 |
A3-sized paper (297 × 420 mm) |
|
*A4 |
A4-sized paper (210 × 297 mm) |
|
*A5 |
A5-sized paper (148 × 210 mm) |
|
*B4 |
B4-sized paper (257 × 364 mm) |
|
*B5 |
B5-sized paper (182 × 257 mm) |
|
*CONT132 |
Continuous form paper (13.2 in. wide) |
|
*CONT80 |
Continuous form paper (8 in. wide) |
|
*EXECUTIVE |
Executive-sized paper (7.25 × 10.5 in.) |
|
*LEDGER |
Ledger-sized paper (17 × 11 in.) |
|
*LEGAL |
Legal-sized paper (8.5 × 14 in.) |
|
*LETTER |
Standard letter-sized paper (8.5 × 11 in.) |
|
*MFRTYPMODEL |
When you select *MFRTYPMODEL, the IBM System i (AS/400) substitutes the value most common for your printer (*LETTER for page printers, *CONT132 for wide-carriage continuous-feed printers, and so forth). |
|
*NONE |
No paper source is specified. |
|
*SAME |
Reflection uses the currently configured host value for the secondary paper source. |
|
Windows Printer |
Reflection uses the currently configured value for secondary paper source specified by the default Windows printer. |