Open a printer emulation session.
From the Setup menu, choose View Settings.
This setting specifies the first or primary paper source to be used by the host printer.
Choose from the following options:
|
Option |
Description |
|---|---|
|
*A3 |
A3-sized paper (297 × 420 mm) |
|
*A4 |
A4-sized paper (210 × 297 mm) |
|
*A5 |
A5-sized paper (148 × 210 mm) |
|
*B4 |
B4-sized paper (257 × 364 mm) |
|
*B5 |
B5-sized paper (182 × 257 mm) |
|
*CONT132 |
Continuous form paper (13.2 in. wide) |
|
*CONT80 |
Continuous form paper (8 in. wide) |
|
*EXECUTIVE |
Executive-sized paper (7.25 × 10.5 in.) |
|
*LEDGER |
Ledger-sized paper (17 × 11 in.) |
|
*LEGAL |
Legal-sized paper (8.5 × 14 in.) |
|
*LETTER |
Standard letter-sized paper (8.5 × 11 in.) |
|
*MFRTYPMODEL |
When you select *MFRTYPMODEL, the IBM System i (AS/400) substitutes the value most common for your printer (*LETTER for page printers, *CONT132 for wide-carriage continuous-feed printers, and so on). |
|
*NONE |
No paper source is specified. |
|
*SAME |
Reflection uses the currently configured host value for the primary paper source. |
|
Windows Printer |
Reflection uses the currently configured value for primary paper source specified by the default Windows printer. |