IMS-Specific Environment Variables

This topic lists environment variables relate to configuring the IMS environment.

ES_ACBLIB

Specifies the locations of the IMS ACB files.

Syntax

Windows:
SET ES_ACBLIB={pathname

UNIX:
ES_ACBLIB={pathname
export ES_ACBLIB

Values

pathname The path location of the IMS ACB files.

Default

If this variable is not set the ACB files are assumed to be in the project directory.

ES_DFS3650

The default transaction to execute or MOD file to be displayed after successfully signing on to IMS. You specify these by setting environment variables prior to the start of the region: ES_DFS3650 - set to MOD if a MOD file is to be sent, or TRX if a TRANSACTION is to be executed. If you set to MOD, ES_MOD3650 needs to be set to the name of the MOD you want to display. If you set to TRX, ES_TRX3650 needs to be set to the name of the transaction.

Syntax

UNIX:
ES_DFS3650=value
export ES_DFS3650

Windows:
ES_DFS3650=value

Values

• MOD - ES_MOD3650 needs to be set to the name of the MOD you want to display
• TRX - ES_TRX3650 needs to be set to the name of the transaction

Default

No default transaction or MOD.

ES_IMS_APARM_DLI [13]

Syntax

ES_IMS_APARM_DLI={Yes|1}

Parameters

Yes|1

Sets the APARM positional parameter for DLI to 19.

Default

Not set. The default behavior sets the APARM positional parameter for DLI to 20.

Comment

The APARM positional parameter for BMP applications remains at 19 regardless of the ES_IMS_APARM_DLI setting.

ES_IMS_BASIC_CHKP_OPT

When set to 1, enables a basic checkpoint call to process as if a SYNC call had been issued. The default is 0 (zero).

ES_IMS_BYPASS_OTMA_DEST_RES

By default, a CHNG call issued from an OTMA- or IMS Connect-submitted transaction assumes that the destination is the OTMA client. In some circumstances, the previous behavior of assuming a non-OTMA client is desirable. To use the previous behavior, set this environment variable to Y.

Values:

• Y
• N (default)

Example

ES_IMS_BYPASS_OTMA_DEST_RES=Y

ES_IMS_CANCEL_MODE

Controls the caching of IMS binaries.

Syntax

Windows:
SET ES_IMS_CANCEL_MODE=<cancel-mode>

UNIX:
ES_IMS_CANCEL_MODE=<cancel-mode>
export ES_IMS_CANCEL_MODE

Values

Permissible values for <cancel-mode> are:

• P - Performs a physical cancel; every transaction will have new-copy behavior. This option is the default behavior, but is the poorest performing of the options.
• L - Performs a logical cancel. This gives the best performance of the options, but can only be used it there is only one DLITCBL entry point in an MPR.
• D - Performs a deferred cancel, which will yield the same behavior as a logical cancel when the MPR services the same MPP back-to-back. It will behave as P (physical cancel) when the transaction changes.

ES_IMS_CLIENTID_LTERM

By default, an IMS Connect request sets LTERM (if not explicitly overridden) to the client-ID when commit-mode is zero and port-ID when commit-mode is one. Setting this variable to "Y" overrides this behavior to have LTERM be set to the client-ID instead of the port-ID.

Values:

• Y
• N (default)

ES_IMS_CONFIG

The IMS TM parameters.

ES_IMS_DB_COMMIT_FLUSH

When set to 0 (zero), forces the flushing of database buffers to disk on CLOSE only (default). When set to 1, forces the flushing of database buffers to disk on COMMIT only.

ES_IMS_DB_TLOG_WRITETHRU

When set to 0 (zero), forces the flushing of TLOG buffers to disk on COMMIT only (default). When set to 1, forces the flushing of TLOG buffers to disk on all database I/O.

ES_IMS_DEADLOCK_WAIT

Time in milliseconds to wait before checking for a deadlock. The default is 1000 (1 second).

ES_IMS_DIAGNOSE

Marks IMS TM as diagnose mode only for IMSMSGQ.

When set to Y, the Transaction Manager (TM) works in diagnostic mode only, and no activity key points are written to the message queue.

CAUTION:

Set ES_IMS_DIAGNOSE only when advised to do so by Micro Focus.

ES_IMS_DOSVS_PCB

Emulates DOS/VSE PCB address alignment for EXEC DLI programs.

ES_IMS_DUMP_ON_DEADLOCK

Creates a system dump when a deadlock is detected.

ES_IMS_DUMP_ON_TIMEOUT

Creates a system dump when a lock timeout occurs.

ES_IMS_EXITPATH

The location of compiled code that contains segment, field, and/or print exits.

ES_IMS_FORCE_SIGNON

Enables a user to force a sign-on to IMS on the current terminal and sign off from other terminals.

ES_IMS_GOTO_CICS_ON_SIGNOFF

Returns to CICS upon logging off or timing out, rather than returning to the IMS sign-on screen, which is the default behavior.

ES_IMS_IBMPLATFORM

Sets the emulation for the IMS run-time. Valid values are: M (for MVS) or D (for DOSVS). The default value is M.

Note: This variable is rarely required to be changed from its default, even for the majority of DOSVS users.

ES_IMS_IMSID

Allows the user to specify the IMS System ID returned to the AIBTDLI INQY ENVIRON call.

ES_IMS_INQY_OTMA

Returns TPIPE, MBR, SYNC, and MSYNC to an INQY call.

ES_IMS_INQY_UNKNOWN

Value returned to an INQY call.

ES_IMS_IRLM

Enables Internal Lock Resource Manager (IRLM) locking. IRLM locking more closely parallels mainframe IMS database DB locking behavior, reducing data constraint and potential for deadlock.

ES_IMS_JES_DIRTY_ABEND

The default setting is Y. IMS marks a JES container as dirty if an IMS application abends or is aborted. To disable this behavior, set this environment variable to N:

ES_IMS_JES_DIRTY_ABEND=N

ES_IMS_LINKAGE_NULL[16]

When an IMS program passes more linkage addresses than there are PCBs in the PSB, sets each extraneous linkage address to a value of NULL.

Syntax

ES_IMS_LINKAGE_NULL={Y|N}

Parameter

Y

Sets each extraneous linkage address to a value of NULL.

N

Extraneous linkage addresses are invalid.

Default

ES_IMS_LINKAGE_NULL=N

ES_IMS_LOCALDLI

Deprecated. See IMS Database Locking. When set to 1, directs batch program execution to process all IMS DB calls entirely in the JES initiator providing significant performance improvement. All IMS DB control processes accessed from the batch program must be stopped before execution because they become exclusively owned by JES until the program completes.

ES_IMS_LOCK_RETRY_DELAY

The IMS DB lock retry delay in milliseconds.

ES_IMS_LOCK_TIMEOUT

The number of seconds during which IMS DB control continues to retry a locked record before timing out. Valid values are 0 to 65535. The default is 30 seconds; a value of 0 indicates an indefinite wait time.

ES_IMS_LTERM_PREFIX

Specify a one- to four-character LTERM prefix alternative to the default (OTMA) to use when the ES_IMS_SINGLE environment variable is set to N. Use of an alternative prefix to OTMA enables you to exercise control over name conflicts.

Syntax

ES_IMS_LTERM_PREFIX=1to4charprefix

Values

Use up to four characters of your choice. Enterprise Server pads the value specified with numeric digits up to eight characters, enabling the LTERM pool to be expanded from 9999 up to 999999. The pool size is dictated by the number of characters used in the specified prefix. For example, the LTERM pool size for a four-character prefix is 9999; for a three-character prefix is 99999; and so on.

Default

OTMA

Note: The default setting of this environment variable suggests that the LTERMS apply only to OTMA clients; however, this is not the case. LTERMS can also be applied to second and subsequent 3270 user connections.

ES_IMS_LU_LTERM

Determines the value of the LTERM literal returned by the MFS system. Valid values are: Y to return the LU name; N to return the user ID.

ES_IMS_MESGQ

Sets the configuration for the IMS TM message queue. The ES_IMS_MESGQ environment variable is generated and set automatically by Enterprise Server, and is reserved.

Restriction: Manually set this variable only when advised to do so by Micro Focus Customer Care.

ES_IMS_MESGQ=[ds-file-name];max-blocks;buffer-count;start-control;[cushion-size]

ds-file-name

An alternative data store file to the default, which is IMSMESGQ.dat.

max-blocks

Data store size limit represented as the number of 64K blocks. Default is 4.

buffer-count

The number of 64K buffers to allocate. Default is 2.

start-control

A flag that sets the start behavior as follows:

Y	Cold start the resource definitions. Default.
S	Cold start the statistics and resource state information.
Q	Cold start the data store (system cold start).

cushion-size

The size of the cushion to be reserved for graceful lack-of-space behavior, represented as a number from 0 to 255. The specified number represents 32 times the actual percentage of max-blocks reserved for emergency use. The default is 4 (a raw value of 128).

ES_IMS_MFS_OPT2_LEGACY[9]

Configures MFS input type option 2 to behave the same as MFS input type option 1.

Syntax

ES_IMS_MFS_OPT2_LEGACY={Y|N}

Parameters

Y

Enables legacy MFS input type option 2 behavior.

N

MFS input type option 2 behavior is the same as MFS on z/OS mainframes.

ES_IMS_OPEN_TIMEOUT

Defines the wait period in seconds during which IMS retries the opening of a database file that is in use by another task. Default is 30 seconds.

ES_IMS_OTMA_DEST[8]

Specifies a list of descriptors that predefine destinations for one of three types: IMS Connect (IMSCON), the MQ-IMS Bridge (MQ), and the IMS print exit (NONOTMA).

Syntax

IMS Connect:

ES_IMS_OTMA_DEST={LTERM-name,IMSCON}[;...]

MQ-IMS Bridge:

ES_IMS_OTMA_DEST={LTERM-name,MQ,MQ-queue-manager-name,MQ-queue-name}[;...]

IMS print exit:

IMS_OTMA_DEST={printer-name,NONOTMA,{LU1|LU3}}[;...]

Parameters

LTERM-name

A destination name specified as a literal value for a single destination, or specified using a literal value followed by one or more asterisks to represent a series of multiple destinations. For example, an LTERM-name of TERM*** creates 1000 LTERM destinations named TERM000 through TERM999. Use this method to avoid defining each destination separately.

MQ-queue-manager-name

The name of the MQ queue manager.

MQ-queue-name

The name of the MQ queue.

printer-name

The printer name.

[;...]

Separate a list of multiple destination descriptors with a semi-colon.

Properties

Default:

None

ES_IMS_PATH

The location of compiled COBOL applications.

ES_IMS_PLI_INDIRECT_PCBADDR

Determines whether the PL/I program converts the PCB address list from a direct to an indirect addressing technique. Set the variable to one of the following values:

D

If the main program is a PL/I program, PCB addresses are converted from a direct to an indirect addressing technique.

Y

Always converts addresses from a direct to an indirect addressing technique as long as the PSB language is set to PL/I.

N

Never converts addresses from a direct to an indirect addressing technique.

The default is D (dynamic).

ES_IMS_RCLASS

Creates a set of newly-named IMS security resource classes, appending the variable's value (maximum of seven characters) to each resource class' default character.

Create theses custom-named classes if you are using the same ESM active directory with two Enterprise Server systems and your security needs to differ for each.

See Resource Classes for IMS Security for the names of the resource classes created if this variable is not set.

ES_IMS_RELEASE

Allows the user to specify the IMS Release returned to the AIBTDLI INQY ENVIRON call.

ES_IMS_REGION

Allows the user to specify the IMS Region returned to the AIBTDLI INQY ENVIRON call.

ES_IMS_ROLLBACK

Enables automatic Backward Recovery; enabled by default.

ES_IMS_ROLLFORWARD

Enables or disables Forward Recovery logging. Valid values are: Y to enable; N to disable. The default is N.

ES_IMS_SINGLE

Enables or disables functionality that allows a single user to sign on to multiple LUs simultaneously.

Values

Y

Disables multiple sign-on functionality.

N

Enables multiple sign-on functionality.

When ES_IMS_SINGLE is set to N, and a user attempts to sign on to an LU using a sign-on that is currently active at another LU, IMS Transaction Manager (TM) assigns a temporary LTERM to the user and LU using a name constructed from the ES_IMS_LTERM_PREFIX setting followed by a numerical value totalling eight characters (see the IMS_LTERM_PREFIX entry in this topic for details). The temporary LTERM is the destination for the user and LU irrespective of activity at other LUs controlled by the user. When a user disconnects from an LU that is served by a temporary LTERM, the LTERM is returned to the temporary pool for reuse.

Also when ES_IMS_SINGLE is set to N, the execution of /dis USER all returns a sub-list for each user that shows all active connections. These connections persist throughout a session, and are dynamically recreated during a warm start.

Default

Y

Note: No KEYPOINT activity is associated with the use of ES_IMS_SINGLE.

ES_IMS_SPARSE_EXIT_LANG

Indicates the language of the IMS DB secondary index sparse routines. The only permissible value is:

• C (for COBOL)

By default, this variable is not set (sparse exits are disabled).

ES_IMS_SUPPORT

Enables IMS support.

ES_IMS_TLOG_COMPRESS

When set to 0 (zero), disables compression of the Backward Recovery TLOG file. When not compressed, the file contains only the information required to recover databases. The default is enabled.

Note: When enabled, Enterprise Server reclaims space in the file when information becomes obsolete.

ES_IMS_TLOG_FLUSH

When set to 1, forces the frequent flushing of TLOG and database buffers to disk.

Warning: Depending upon the number of database updates, the frequency of commits, and other computer activity, use of ES_IMS_TLOG_FLUSH could result in significant performance degradation.

Note: This environment variable is deprecated. Use ES_IMS_DB_TLOG_WRITETHRU to flush TLOG buffers and ES_IMS_DB_COMMIT_FLUSH to flush database buffers.

ES_IMS_TLOG_MAXSIZE

Maximum size of the IMS DB transaction logging file in bytes. The default is 4GB or h"FFF00000".

ES_IMS_TLOG_PATH

The location of IMS DB transaction logging files. The default is the Enterprise Server system directory.

Note: Once created, you can move log files, but do not rename them. Before attempting to recover a database, all log files must reside in the directory specified by ES_IMS_TLOG_PATH.

ES_IMS_TLOG_THRESHOLD

Threshold size of the IMS DB transaction logging file. When reached, the current TLOG file is closed and a new TLOG file created for subsequent transactions. The default is 2GB or h"7FFFFFFF".

ES_IMSCFG

The location of the IMS configuration files IMSCONFG.DAT.

ES_IMSDAT

The location of IMS DB data files.

ES_IMSLIB through ES_IMSLIB25

ES_IMSLIB specifies the location of DBDGEN2.DAT, DBDGEN2F.DAT and PSBGEN3.DAT files. You can use this same variable with a sequential number appended to search additional locations. You can specify up to 25 locations. For example:

ES_IMSLIB=$BASEPATH\ED_SETS\IMSLIB 		     /*sets the first location for IMSLIB objects */
ES_IMSLIB2=$BASEPATH \ED_SETS_SYS\IMSLIB  /* sets the next location to search */
ES_IMSLIB3=$BASEPATH \ED_SETS_QA\IMSLIB		 /* and the next */
ES_IMSLIB4=$BASEPATH \ED_SETS_PROD\IMSLIB	/* etc. */

ES_MFSLIB

The location of the control blocks generated by the MFS generation program.

Syntax

UNIX:
ES_MFSLIB=pathname
export ES_MFSLIB

Windows:
ES_MFSLIB=pathname

Values

• pathname The path to the MFS directory.

Default

product_install_dir/etc/ims

ES_MOD3650

The default MOD file to be displayed after a successful sign-on to IMS. See ES_DFS3650.

Syntax

UNIX:
ES_MOD3650=filename
export ES_MOD3650

Windows:
ES_MOD3650=filename

Values

• filename - The name of the MOD file.

ES_SSTM_IMS

Location of the JCL used to initialize the SSTM IMS environment.

ES_TMC_AGGREGATE

Controls the performance environment for IMS TM data stores. See ES_TMC_AGGREGATE in Environment variables in alphabetical order for details.

Syntax

UNIX:
ES_TMC_AGGREGATE={[,N|,D]|nnn,Y}
export ES_TMC_AGGREGATE

Windows:
SET ES_TMC_AGGREGATE={[,N|,D]|nnn,Y}

Values

aggregate-delay

The time in milliseconds to wait for additional flush requests to accumulate.

aggregate-control

A control setting as follows:

Y	Aggregate data store flush-buffers-to-disk operations
N	Do not aggregate
D	Disable flush operations

Default

,N

ES_TRX3650

The default transaction to run after a successful sign-on to IMS. See ES_DFS3650.

Syntax

UNIX:
ES_TRX3650=transaction
export ES_TRX3650

Windows:
SET ES_TRX3650=transaction

Values

• transaction The default transaction to run.

ES_USR_DFLT_IMS

Allows you to override the default user when no user is logged on for IMS authentication.

Syntax

UNIX:
ES_USR_DFLT_IMS=user
export ES_USR_DFLT_IMS

Windows:
SET ES_USR_DFLT_IMS=user

Values

• user - The user name to override the default.

Default

IMSUSER

Note: Micro Focus recommends that you use the Advanced Region Properties page in the Enterprise Server Common Web Administration (ESCWA) interface to configure this environment variable. See Advanced Region Properties for more information.

ICONN1

Controls the client TCP connection status of an IMS Connect emulator.

IMSCPY

The location of copybook files for DBDGEN, PSBGEN and MFSGEN utilities .

MF_SPLJNO_LOCK[13]

Determines whether job number acquisition is enqueued to reduce file and disk access or handled with file locks to improve performance when running JCL jobs on multiple processes.

Syntax

MF_SPLJNO_LOCK=Y

Parameter

Y

Enqueue job number acquisition.

Default

Not set. Job number acquisition is handled with file locks, which can improve performance when running JCL jobs on multiple processes.

Comments

The parameter value is not case sensitive.

Setting MF_SPLJNO_LOCK to no value or any value other than Y or y results in the default behavior.

MFIMS_ACBDUMP_TIMESTAMP

Suppresses date/time stamp display in ACB report.

MFIMS_BMPCHKP

Returns a QC to a checkpoint call when it the call includes an IO area.

MFIMS_BTS

Configures Mainframe Express-format BTS tracing

MFIMS_DIBSTAT_CODES

Specifies additional DIBSTAT return codes to be returned to EXEC DLI program.

MFIMS_DLI_OPT

Specifies DL/I call optimization flags.

MFIMS_DIAG

Enables IMS BTS format diagnostic tracing.

MFIMS_FLUSHTRACE

Flushes BTS trace file to disk after every write.

MFIMS_FP_DA

Bypasses keycheck on IMS Fastpath DB delete.

MFIMS_LOADMVS

Disables load of MVS support for IMS application programs.

MFIMS_PCBCALL

Allows a standalone EXEC DLI program to issue a PCB call.