ES Control

Use this page to view and change control information for this server.

Click Stop to stop the current server.

Check Dump to take a system dump when the server is stopped.

Check Immediate to force an immediate stop. If you force an immediate stop, you will see "The page cannot be displayed" error, as there is no longer a server to connect to.

Enter Message
To send a message to all clients, type the message and then click Message All
Apply Scope
For a PAC, all changes to timeouts, trace flags, and memory strategy will be applied to:
Local
Only the local region.
PAC
All members of a PAC except the regions where local changes have been made.
PForce
All members of a PAC.

General

SEPS
Displays the number of concurrent service execution processes currently supported by this server. You can change the number by entering a value in the field.
Force Phase In
Check this to have MSS reload programs each time they are invoked. This applies only to programs that are not marked resident and have not been loaded with the hold attribute.
Admin SEPs
The number of Admin SEPs defined.
Initial Transaction
The transaction to run when a TN3270 session connects to the server.
Transaction Threshold
The maximum length of time in seconds that a transaction can run before a message is logged to the console to indicate that it has exceeded its threshold. A value of 0 indicates that there is no threshold.
HTTP Out
Displays the size of the data blocks passed across shared memory for HTTP output. You can change the HTTP size by entering a value in the HTTP Size field.

Timeouts

ID
Displays the time in minutes that the system will allow an ESMAC or TN3270 client session to remain idle before session timeout. At system startup, this is initialized to the value specified in the System Initialization Table. A value of 0 indicates that there is no timeout.
Note: If you change the value, the change will not be saved at system shutdown.
Runaway
Displays the maximum continuous period of time in seconds that the region will allow a transaction to run without making an API call. When this value is exceeded, the transaction is abended. At system startup, this is initialized to the value specified in the System Initialization Table. A value of 0 indicates that there is no timeout.
Note: If you change the value, the change will not be saved at system shutdown. You can override this value for an individual transaction through the relevant Program Control Table entry.
Input
Displays the maximum time in seconds allowed for operator response to an explicit CICS RECEIVE command before the transaction is abended. At system startup, this is initialized to the value specified in the System Initialization Table. A value of 0 indicates that there is no timeout.
Note: If you change the value, the change will not be saved at system shutdown. You can override this value for an individual transaction through the relevant Program Control Table entry.
Deadlock
Displays the maximum time in seconds that the region will permit an application to wait for a resource that has been locked by another process. At system startup, this is initialized to the value specified in the System Initialization Table. A value of 0 indicates that there is no timeout.
Note: If you change the value, the change will not be saved at system shutdown. You can override this value for an individual transaction through the relevant Program Control Table entry.

Diagnostics

Dump
Click this to initiate a dump. Dump information is stored in the data set identified by Active Dump DS. If you do not initiate a dump using DUMP, dumps occur when the system and/or transaction abends, or if the program executes the EXEC CICS DUMP command. A dump will occur on an abend only if Sys and/or Tran is checked in the Dump on Abend group.
Switch Dump Set
Click this to switch between the A and B data sets that are used to store dump information.
Switch Trace Set
Click this to switch between A and B data sets used to store trace information.
Size
Displays the maximum size of the auxiliary trace and dump file in kilobytes. A value of 0 (zero) means that there is no maximum size. You can change the size by entering a value, in kilobytes, in the Diagnostic Size field. The maximum size you can enter in this field is 999999 kilobytes.
Dump
Displays the current data set used for dump information.
Dump Count
Displays the number of dumps (n) that have occurred.
Trace Active
If checked, the in-memory trace data is transferred to the auxiliary (diagnostic) data set at the roll-over of the system trace table.
Trace
Displays the current data set used for trace information.
Blocks
Displays the number of blocks of trace information captured.
Dump on ABEND Sys
Check this to produce a dump if an abend occurs due to an error in Enterprise Server itself.
Dump on ABEND Tran
Check this to produce a dump if an abend occurs due to a problem with any of your transaction programs. When checked, you can further control the contents of the dump file on the program level by checking or unchecking Dump on abend on the PCT Properties dialog box for a specific program. When unchecked, the setting of Dump on abendis ignored.
Debugger
Check this to enable dynamic debugging.
Enable Failure Reporting
Check this field to enable the generation of the Application Diagnostic report for this enterprise server instance. See Application Diagnostic Reporting for Enterprise Server for more information.
Core Dump on Report
Check this to enable the generation of a core dump in the Application Diagnostic report. See Application Diagnostic Reporting for Enterprise Server for more information.
Print Environment on Report
Check this to enable the printing of the contents of COBCONFIG and MFTRACE_CONFIG in the Application Diagnostic report. See Application Diagnostic Reporting for Enterprise Server for more information.
Local Trace on Report
Check this to enable printing the local trace table in the Application Diagnostic report. See Application Diagnostic Reporting for Enterprise Server for more information.
Dynamic CTF File Location
Specify the location of the dynamic CTF configuration file to use when tracing this enterprise server region.
CTF Action
Specify the dynamic CTF action for tracing based on the dynamic CTF configuration file provided:
As on file
The CTF trace will be set as specified in the dynamic CTF configuration file. The output location for the trace will be either the location configured by the original configuration file if MFTRACE_CONFIG was specified before starting the enterprise server region, otherwise it will use the enterprise server region's working directory.
All on
The CTF trace will be configured for "debug" on all components that have an mftrace.level.component_name entry in the dynamic CTF configuration file. The output location for the trace will be either the location configured by the original configuration file if MFTRACE_CONFIG was specified before starting the enterprise server region, otherwise it will use the enterprise server region's working directory.
All off
The CTF tracing will be disabled for all components that have an mftrace.level.component_name entry in the dynamic CTF configuration file.
CAUTION:
You must set the CTF Action field to All off before modifying the Dynamic CTF File Location or the file's content. Failure to do this will result in memory corruption.

HSF Data

Switch
Click Switch to switch collection to the alternate .csv file before the active file has reached the maximum size.
Enable HSF Collection
Check this to switch on HSF processing.
Write to disk
Enables writing of HSF records to comma-separated files. These are called cashsf-a.csv and cashsf-b.csv, and are written to the system directory. Only one file is written to at any one time - this is called the active file. You write to the active file until you click SWITCH or when the active file reaches the maximum size, at which point the alternate file becomes active. If the alternate file already exists it will be backed up with the name cashsf.nnn where nnn is the number of the backup. When you start an enterprise server, cashsf-a.csv is always set as the active file, and if it already exists it is backed up. Backup extensions are numbered from .001 up to .999. When a backup with extension .999 exists then the next backup will be created as cashsf.001. If cashsf.001 already exists then it will be overwritten.
Max HSF Size
If you have checked Write to disk, this is the size in kilobytes the .csv file will reach before Enterprise Server switches to the alternate .csv file. A value of 0 selects the maximum size possible (4 Gb).
Number of ESMAC Records
This displays the number of HSF records that Enterprise Server will hold in memory. When this number is reached, older records will be deleted when a new one is created. In addition, records older than one hour are deleted. The minimum value is 0 (no HSF data is displayed), the maximum is 4096.
Create JCL File Records
Check this to switch on the generation of JCL file (JCLF) records for 'mainframe' files, such as those that are accessed with FCDCAT and ASSIGN(EXTERNAL). JCLF records are local to a step, so that multiple records can be generated for a single data set name in the same job - one record is created for each step in which the data set is accessed.

TSC Data

Overview
Click Overview to open the TSC Data dialog box that displays a summary overview of the TSC data store.
Detail
Click Detail to open the TSC Data dialog box that displays details of the TSC data store object that starts at (block-number)/(segment-number).
Max
Specifies the limit for the size of the data store repository which contains all TS and intra-partition TD data when TranClass is enabled. This repository also contains the latest three keypoints (system state) as well as static system state items and XA recovery information.
Current Blocks
The number of 62,992 byte blocks of data store each containing 254,248 byte segments (allocation units).
Cushion
The reserved proportion of the data store that is released when a data store allocation request is required. Once released, system function is restricted until it can be re-acquired. This is a mechanism to soften the impact of running out of data store space.
Aggregate
If this is not checked, castsc flushes the OS data store buffers at thread transactional recovery boundaries.
Aggregate Time
Specifies the number of milliseconds a castsc thread OS data store buffer flush request will wait for other threads to present flush requests that can be aggregated with it before proceeding with the physical OS buffer flush request. The single OS buffer flush request satisfies all the thread requests accumulated behind it.
Disable Flush
Check this to disable all explicit OS data store flush requests within castsc.
TS Queue Expiry
Temporary Storage data queues contain a last operation date/time stamp. When this value is non-zero, a check is made periodically and non-protected queues that have not been referenced within the specified time frame are discarded.
Note: TSQ table entries can override the system default value for individual queues and groups of queues.
Keypoint Frequency
Specifies the number of transactional recovery boundaries that are encountered before the next keypoint is executed.
Keypoint Count
This is the count of keypoints executed since the server was started.

Trace

Displays the currently set trace points. The trace points displayed are those that have been set by the SIT. You can change individual trace points by checking each trace point required, or you can click All to check all trace points.
Note: This overrides the trace points set by the SIT. Any changes you make are effective at the point you click Apply. The changes are lost the next time the server is initialized.

Server

app-cont
Check this to indicate that MSS is to trace its Application container component.
mfcm
Check this to enable Configuration Manager tracing.
lock-data
Check this to trace lock management for non-threaded processes.
tmp
Check this to indicate that MSS is to trace its table management component.
tsc-data
Check this to trace the data in calls to the castsc process.
cluster
Check this to trace ES Cluster component.
msg
Check this to indicate that MSS is to trace its messages component.
trc
Check this to indicate that MSS is to trace the castrc process.
tsc-enq
Check this to indicate that MSS is to trace its castsc enqs component.
dmp
Check this to indicate that MSS is to trace its dump control component.
reqh
Check this to indicate that MSS is to trace its request handler component.
trc-data
Check this to indicate that MSS is to trace its castrc data.
tsc-mon
Check this to indicate that MSS is to trace its castsc monitors.
exits
Check this to indicate that MSS is to trace the user exits.
rm
Check this to indicate that MSS is to trace its resource manager component.
trc-enq
Check this to indicate that MSS is to trace its castrc enqs component.
tsc-thread
Check this to trace thread processing and lock management in the castsc process.
fh
Do not check this unless advised by Micro Focus.
saf (Security)
Check this to trace System Authorization Facility (SAF) calls.
trc-thread
Check this to indicate that MSS is to trace the castrc thread.
tsc-trd-stg
Check this to indicate that MSS is to trace the castsc thread storage.
fh-enable
Do not check this unless advised by Micro Focus.
scp
Check this to indicate that MSS is to trace its storage control component.
trc-trd-stg
Check this to indicate that MSS is to trace its castrc thread storage.
xfp
Check this to trace data in transformer processing.
jcp
Check this to indicate that MSS is to trace its journal control component.
sql-api
Not used.
tsc
Check this to trace calls to the castsc process.
xfp-all
Check this to trace data and processes in transformer processing.
kcp
Check this to indicate that MSS is to trace its task control component.
srv
Check this to indicate that MSS is to trace its service handler component.
tsc-buffer
Check this to indicate that MSS is to trace its castsc buffer component.
xfp-data
Check this to trace data in transformer processing for threaded processes.

RAS

Casras is a PAC related process that manages CICS resources, ensuring that they are in synchronization between regions:

ras
Check this to trace the casras process.
ras-thread
Check this to trace the casras thread component.
ras-data
Check this to trace the casras data component (currently unused).
ras-enq
Check this to trace the casras enqs component.
ras-data-all
Check this to trace the casras all data component (currently unused).
ras-trd-stg
Check this to trace the casras thread storage component.

CICS

api
Check this to indicate that MSS is to trace the CICS API calls.
fcp
Check this to indicate that MSS is to trace its file control component.
pcp
Check this to indicate that MSS is to trace its program control.
ts-td
Check this to indicate that MSS is to trace its temporary storage/transient data (TS/TD) component.
cws
Check this to indicate that MSS is to trace its CICS Web Services.
icp
Check this to indicate that MSS is to trace its interval control component.
tcp
Check this to indicate that MSS is to trace its terminal control component.
user
Check this to enable a user trace.

Communications

cci
Do not check this unless advised by Micro Focus.
com-enq
Check this to trace the comms enqs component.
sna
Check this to trace the cassna process.
sna-thread
Check this to trace the cassna thread component.
com
Check this to trace the comms process.
com-mfcs
Check this to trace the comms - mfcs component.
sna-data
Check this to trace the cassna data component.
sna-trd-stg
Check this to trace the cassna thread storage component.
com-data
Check this to trace the comms data component.
com-thread
Check this to trace the comms thread component.
sna-data-all
Check this to trace the cassna all data component.
com-data-all
Check this to trace the comms all data component.
com-trd-stg
Check this to trace the comms thread storage component.
sna-enq
Check this to trace the cassna locking component.

Memory Strategy

Use this diagnostic feature to control the frequency and type of run-time memory validation, as well as specifying the processes to which these settings apply. You use this facility to help track down memory violations and corruptions. Unless you are directed otherwise by OpenText Support for Micro Focus Products, Micro Focus recommends that you use only the default settings, which result in the most efficient use of memory. Setting these values inappropriately might result in a degradation of system performance and excessive memory usage.

Using invasive settings in a development or user acceptance environment might be acceptable and even desirable, but you should use caution when used in a production environment. You set the desired memory strategy at the time you wish to diagnose a particular problem, and reset the strategy when the diagnosis is complete.