Have a VTAM systems programmer complete this worksheet. Record your values in the space provided. Where suggested values are given, verify that your settings in VTAM match the suggested values.
Key
I denotes informational values may be useful in coordinating installation or in tracking down problems.
For VTAM, the minimum level is 3.2.
NCP is not required by XDB Link, but it must be at least version 4.2 if it is used.
| TCP | SNA | Parameter | Suggested Value | Your Value | Ref |
|---|---|---|---|---|---|
| R | PU Definition |
DLOGMOD=ANY3270 XID=YES PUTYPE=2 STATOPT='XDB SAMPLE' Accept system default for all other values |
A1 | ||
| R |
PU Address
Used by SNA software on the PC |
A2 | |||
| R |
PU CP Name
Used by SNA software on the PC |
A3 | |||
| R |
IDNUM
Used by SNA software on the PC |
A4 | |||
| R |
IDBLK
Used by SNA software on the PC |
05D for 3172 device | A5 | ||
| R |
LU6.2 Mode Entry
(MODEENT ID) May be used by SNA software on the PC |
Use IBMRDB or the following: TYPE = X'00' FMPROF = X'13' TSPROF = X'07' PRIPROT = X'B0' SECPROT = X'B0' COMPROT = X'50B1' RUSIZES = X'8989' PSERVIC = X'060200000000000000002F00' |
A6 | ||
| R |
LU Name for LU6.2 Terminals
Used by SNA software on the PC |
XDBLU621 LU LOCADDR=0,MODETAB=RDBMODES, RESSCB=20 |
A7 | ||
| I | LU Name for 3270 |
XDB32701 LU LOCADDR=02, LOGAPPL=your3270mode |
A8 | ||
| R | R |
DB2 APPLID
Used by SNA software on the PC See the IBM Manual Distributed Relational Database Connectivity Guide. |
AUTH=(ACQ) AUTOSES=1 SECACPT=ALREADYV SRBEXIT=YES VERIFY=NONE VPACING=2 See your DB2 Administration Guide for other values |
A9 | |
| R | TCP for APPLID, required only if using XDB Link Host Option. |
APPL=YES, AUTH=(ACQ), DLOGMOD=IBMDB2LM, DMINWNL=10, DSESLIM=20, SECACPT=ALREADYV, SRBEXIT=YES, VPACING=8 |
A10 |
Please return this worksheet to the XDB Link Installation Coordinator.