1100-1199 - DBEnterprise

Error code	Message and description
1100	I/O error on filename: description Enterprise Server encountered an I/O error on the indicated file.
1101	Open error on filename: description Enterprise Server was unable to open the indicated file. This is not necessarily a fatal error. For example, there are no cache files present the first time Enterprise Server is run to cache a particular source.
1102	Error reading from filename: description Enterprise Server encountered an error trying to read the indicated file.
1103	Error writing to filename: description Enterprise Server encountered an error trying to write the indicated file.
1104	Allocation of number bytes failed The operating system could not provide the requested number of bytes of memory from the heap.
1105	Deallocation of number bytes failed The operating system could not return the specified number of bytes of memory to the heap.
1106	Selection limit maxselects exceeded: numselections The Databridge Client tried to select more data sets than the maximum allowed.
1107	WinSock initialization failure. description Windows Sockets couldn't be initialized. This means TCP/IP is unavailable.
1108	Invalid command line parameter: 'parametername' Check the spelling of the parameter you are entering, and make sure that parameter is valid for the command.
1109	Client protocol level (clientlevel) must be at least minimumlevel The Databridge Client's protocol level is obsolete and must be upgraded. To access Enterprise Server, the client's protocol level must be the equal to or greater than the specified minimumlevel.
1110	Filter routine failed An error was encountered in the filtering routines. Remove the associated filter files from the
Enterprise Server Config directory and rerun the client: sourcename(updatelevel).filter If the error persists, contact Micro Focus Technical Support.
1111	Trouble closing audit file afn Enterprise Server encountered an error while trying to close a cache file.
1112	DBSelect requires data set name (#structurenum) The data set selection Remote Procedure Call from the client did not include a data set name, which is required. structurenum is the DMSII structure number.
1113	Source does not have a base Enterprise Server could not find the base source associated with a local source. Delete the local
source, add the base source, and then create the local source from it.
1114	Audit file afn corrupted A cached audit file is corrupted. Remove it and any later cached audit files for that source and then
run Enterprise Server with the CACHE command to rebuild them.
1115	Corrupted data in data set block blocknum A file block in an ORDERED data set is corrupted. Report this to your DMSII database administrator.
1116	Incorrect MCP label headerfield = 'value' on drive drivenum unit unitnum The disk label is incorrect for an MCP disk. Enterprise Server will not try to use that drive for direct disk cloning.
1117	Structure #structurenumber format level mismatch: Filter (filterlevel) vs. record (datasetlevel) The loaded filter has a different data set format level than the record currently being filtered. Remove the associated filter files from the Enterprise Server Config directory and rerun the client: sourcename(updatelevel).filter If the error persists, contact Micro Focus Technical Support.
1118	Source sourcename does not have a cache You attempted to use the Enterprise Server cache command for a source that does not have
caching set up yet. This error may appear in the log the first time the source is cached but Enterprise Server will continue creating the cache files.
1119	Audit file afn is not open The cached audit file was expected to be open but was not. If this error persists, contact Micro
Focus Technical Support.
1120	Unrecognized file type version in cachefile The cache file was created by an unsupported version of Enterprise Server or the file is not a cache file at all. Remove the file(s) from the cache directory before reprocessing.
1121	Audit location not found: AFN afn, ABSN absn, Inx index The client specified an audit location that was missing or incorrect. Either correct the client control tables or reclone the database.
1122	DBEnterprise can not clone an ALTERed data set: datasetname Enterprise Server cannot clone altered data sets that require a REFORMAT routine. These data sets require special formatting routines on the mainframe, so they can be cloned only by the Databridge Host software (unless you create a user-written .dll to perform the reformatting). If there is an altered data set that you don't need in one of your local (filtered) Enterprise Server sources, right-click it and select Exclude all rows. The red square appears in the data icon, indicating that it will be omitted from replication.
1123	Family familyname has no local disk units Enterprise Server does not have visibility to the disk units comprising the indicated family name. It will not use direct disk cloning to access the data on that family.
1125	Checksum error reading data set The block checksum in a data set was incorrect and therefore the data in the block is suspect. Notify your DMSII database administrator. Enterprise Server will not use direct disk cloning to process this data set.
1127	Unable to access configuration directory. Please use setup.exe to install DBEnterprise The Config directory is created by Enterprise Server during a successful installation. Reinstall Enterprise Server to create the directory and the associated registry keys. If the registry keys were incorrect and the directory is still on disk, the setup program will preserve the sources you have already defined.
1128	Unable to access configuration file 'filename' Make sure that the configuration text file you are trying to import is in the Enterprise Server Config directory.
1129	Errors in configuration filefilename Review the configuration log file to determine where the error occurred.
1130	Unable to determine client IP address Enterprise Server was unable to retrieve the IP address associated with a specified host name. The operating system was unable to reach a DNS to convert the host name to an IP address. This might be due to firewall restrictions.
1131	Unable to determine client IP address You must select both of the specified data sets. To include both of the data sets in a local source, right-click and select Include all rows for each data set. The green square appears in the data icon, indicating that it will be included in replication. The Databridge Client must select both data sets during replication. For example, you cannot clone just the virtual data set or just the data set it is derived from.
1132	Audit file afn audit level auditlevel is not supported The audit file that Enterprise Server reads from the MCP server has an unsupported audit level and therefore can't be interpreted properly. Enterprise Server will try to request the audit data from DBServer.
1133	Host 'hostname' interrupted data transmission The specified host transmitted a new request before Enterprise Server finished responding to the previous request. This caused Enterprise Server to discard the rest of the previous response. This error could indicate problems in the network configuration or hardware.
1135	Operator terminated programname Someone stopped Enterprise Server. It terminated at the first quiet point after receiving the quit
command. If you run the Databridge Client again it will begin at that quiet point.
1136	Unable to load filename filter for update level updatelevel Someone stopped Enterprise Server. It terminated at the first quiet point after receiving the quit command. If you run the Databridge Client again it will begin at that quiet point.
1137	Unable to load sourceinfoname source information Enterprise Server was unable to find the source information file for the requested source. The source information file should be in the Config folder and have the file extension ".source". Correct the source name if it is in error. Otherwise, use Enterprise Server to define it.
1138	Unable to start description Enterprise Server was unable to start a process or thread. It will not be able to use direct disk
cloning (or whatever the description indicates).
1139	Unsupported function The requested RPC is not supported in the current release of Enterprise Server. This can occur in
some situations with "cascading" Enterprise Server.
1140	Unable to change to directory directoryname Either the directory is missing or Enterprise Server does not have access rights to change to it.
1141	XML parser error: description The flat file schema file had syntax or semantic errors. Correct the schema file.
1143	Unable to find filename (reason) A necessary file is missing. Restore the file or regenerate it.
1144	Fatal error: Unable to open a log file for functionname Enterprise Server was unable to create a log file in the Logs subdirectory. Either the subdirectory is missing or corrupted or out of space. Enterprise Server will not continue if it can't write a log file.
1145	Unexpected EOF reading from filename Enterprise Server encountered the end of the input file before it found data it expected to be
there. If the filename is LastSchema.txt, make sure that it contains a valid number.
1146	Update level requested (updatelevel) > LastSchema update level (currentupdatelevel) A flat file "audit" or clone subdirectory requires a schema level greater than the current schema level, which is specified in the LastSchema.txt file. Provide a schema for the desired update level and change the LastSchema.txt file to contain the new level.
1147	Update level is schemaupdatelevel not clientupdatelevel The flat file schema update level is schemaupdatelevel but the DATASOURCES table in the client database had update level clientupdatelevel. You must provide the proper flat file schema or redefine and reclone the client database.
1148	SQL ODBC initialization failed When Enterprise Server tried to process the VALIDATE command it was unable to access ODBC.
Make sure that ODBC is supported in your Windows operating system.
1149	SQL Server login failed The username/password was missing or incorrect on the VALIDATE command. Make sure that
the username is valid for the Client database.
1150	Unable to connect to database 'databasename' Enterprise Server cannot connect to the Databridge Client database. Verify that the Client, server, and relational database are running.
1151	Unable to append SQL text 'text' While constructing an SQL command, ODBC returned an error. If this error persists notify Micro
Focus Technical Support.
1152	Unable to execute SQL command: command The SQL command failed probably due to a syntax error or security restrictions. If the command has a syntax error, notify Micro Focus Technical Support. Otherwise correct the problem and rerun the command.
1153	SQL Free Statement failed The SQL Free command failed. If this error persists, notify Micro Focus Technical Support.
1154	SQL Prepare Statement failed for: statement The SQL Prepare command failed. If this error persists, notify Micro Focus Technical Support.
1155	SQL Fetch failed for: statement The SQL Fetch command failed. If this error persists, notify Micro Focus Technical Support.
1156	SQL variable bind failed The SQL Fetch command failed. If this error persists, notify Micro Focus Technical Support.
1157	SQL data conversion failed Enterprise Server was unable to convert an SQL variable to a text string for comparison with a text
file. If this error persists, notify Micro Focus Technical Support.
1158	Unexpected SQL data type: datatype The VALIDATE command encountered an SQL variable type that is not currently supported in Enterprise Server. If you need this data type, contact Micro Focus Technical Support with this error for a possible new feature enhancement.
1159	No data items found for 'datasetname' in source 'sourcename' This can occur when all of the data items were filtered out by DBServer (via the Databridge Support library), or that the local filter has filtered out the data items.
1160	Table 'tablename' key 'keyvalue' row not found for record number %recnum The VALIDATE command read a record from the flat file but no matching row was found in the client database. Most likely the record was filtered out.
1161	Table 'tablename' key 'keyvalue' data mismatch for record number recnum, offset offset The VALIDATE command has found a mismatch between the record in the input text file and the row that was stored in the relational database. Report this to Micro Focus Technical Support.
1162	Table 'tablename' key 'keyvalue' duplicate rows The specified key was found in more than one row in the specified table. Check to see that the index in the Client database is UNIQUE. You will probably have to reclone the table after the problem is corrected.
1163	Unable to connect to server servername at port portnumber This can occur in the following circumstances: The destination server is down. The server name or IP address was entered incorrectly Server access is prohibited by a firewall
1164	Winsock initialization failed This is a Windows error indicating that there is a problem with TCP/IP.
1165	Error opening communication socket Enterprise Server was unable to establish a TCP/IP connection with the remote host (either
DBServer or a Databridge Client). Make sure the remote host is still responding to TCP/IP requests.
1166	Host 'hostname' closed communication socket Communication may have been interrupted on the specified host. This error occurs when the
remote process terminates abnormally, such as a Ctrl-C on the Databridge Client or a DS on DBServer. Check the host, make sure it is running, and then try again. When tracing is enabled in Enterprise Server, the log will contain these messages when the Client
or DBServer disconnects. If replication is complete these messages can be ignored.
1167	Error sending network message This message indicates a problem sending messages on the network. Replication will terminate
immediately. Usually this means the remote process has terminated abnormally.
1168	Error reading network message This message indicates a problem reading messages on the network. Replication will terminate
immediately. Usually this means the remote process has terminated abnormally.
1169	Message sequence error (expected requestnum but received responsenum) The response from the remote process has a sequence number different from the last request sent to it. This could indicate network errors or messages leftover from a previous replication run.
1170	Protocol level (DBServerlevel) must be at least minlevel The DBServer protocol is too low to be compatible with Enterprise Server. A new release of the Databridge Host software must be installed.
1171	Unrecognized update type: updatetypenum The DBServer has sent an update containing an unrecognized update type in the UpdateInfo. If this persists report it to Micro Focus Technical Support.
1172	Internal software error: description Contact Micro Focus Technical Support.
1173	Invalid source type (sourcetypenum) for sourcename The source information found in sourcename.source contains an unrecognized source type number. Source types can be Remote, File, or Local. The source information file has been corrupted. Remove it and use Enterprise Server to create it.
1174	Unable to determine client host name for ipaddress The operating system is unable to retrieve the host name associate with an IP address. Typically this means the reverse-DNS is not accessible. Contact your network administrator.
1175	Please use setup.exe to install DBEnterprise You are attempting to use an Enterprise Server feature that is not successfully installed.
1176	Tree item description removed This is a status message informing you that the source you selected to remove was removed
successfully.
1177	Audit Mirroring is not enabled for sourcename Audit mirroring is disabled because the Mirroring parent directory option is blank.
1178	Audit read size (length) too short for block The amount of data read from the audit file is less than the declared size of the audit block. The entire audit block has to be readable in order to process it. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Micro Focus Technical Support.
1179	Audit block size (length) exceeds max (maxlength) The value in the audit block size field exceeds the maximum size declared in the DASDL. Usually this error indicates that data read is not really an audit block, just leftover data on disk. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Micro Focus Technical Support.
1180	Block first ABSN (absn) not = dup ABSN (dupabsn) The ABSNs in the current audit block do not match. An audit block contains its ABSN in two places for integrity checking. Usually this indicates that the audit block has not been completely written yet. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Micro Focus Technical Support.
1181	Username/password encryption error: errormsg The Windows encryption routine encountered the error identified by errormsg when encrypting the username and password.
1182	Username/password decryption error: errormsg The Windows decryption routine encountered the error identified by errormsg when decrypting the username and password.
1183	Logon to user 'username' failed The Windows logon using username and password failed. This error occurs when Enterprise Server
attempts to use an invalid username/password pair. Correct the username and password in the appropriate configuration dialog box.
1184	Checksum error in Afn afn Absn absn sector seg The computed checksum and the stored checksum for an audit block do not match. This error indicates this audit file has experienced some type of I/O error. Enterprise Server will automatically retry the read after a brief waiting period. If this error persists, notify Micro Focus Technical Support.
1185	Address Check error in auditfile sector seg found address The audit block read at the specified sector has an AddressCheck value of address, when sector was expected. This error indicates this audit file has experienced some type of I/O error. Enterprise Server automatically retries the read after a brief waiting period. If this error persists, notify Micro Focus Technical Support.
1187	Invalid Julian date (YYYYDDD): date The date conversion routines received a request to convert a Julian date but the supplied date was not a valid Julian date.
1188	Invalid Gregorian date (YYYYMMDD): date The date conversion routines received a request to convert a Gregorian date but the supplied date was not a valid Gregorian date.
1189	Invalid type parameter 'param' The parameter value was not legal for the indicated parameter. Correct the parameter value and
try again.
1190	DBServer protocol level does not support RPC function A remote procedure call (RPC) was attempted for a function that is not supported by the attached DBServer. Upgrade DBServer (Databridge Host software) to a later release and try again.