The adapter settings allow you to view the current configuration for the network adapters installed in Access Gateway Appliance and manage the IP addresses that are assigned to them.
To configure an adapter to use more than one IP address, use these settings to add them.
If you have multiple adapters installed on an Access Gateway Appliance machine, you can only configure eth0 during installation. Use the procedure described in this section to configure the others.
If you have added an adapter to the machine after installing Access Gateway, you need to use the New NIC option before it can appear in the adapter list.
If you have added an adapter to the machine after installing Access Gateway, you need to use the New NIC option before it can appear in the adapter list.
To view or modify your current adapter settings:
Click Devices > Access Gateways > Edit > Adapter List.
(Conditional) If Access Gateway is a member of a cluster, select the server you want to configure in Cluster Member. All changes made to this page apply to the selected server.
Select the adapter you want to modify, then select one of the following actions:
To add a new subnet to an existing adapter, click New.
To delete a subnet, select a subnet, then click Delete. More than one subnet must be configured for you to delete one.
To modify an existing subnet, click the IP address of the subnet.
To configure a new subnet or a new IP address for a subnet, specify the following details:
Subnet: Displays the address of the subnet that you are modifying. This is empty if you are creating a new subnet.
Subnet Mask: (Required) Specifies the subnet mask address for this subnet. The address can be specified in standard dotted format or in CIDR format.
Addresses: Allows you to manage the IP addresses assigned to the subnet.
To add an address, click New, specify the address, then click OK.
To delete an address, select the address, then click Delete.
To change the IP address, see Changing the IP Address of Access Gateway Appliance.
Click OK.